Filtres
Lift Height 3,5" Increase ground clearance Easy installation Max tyre diameter: Sport / Overland Fenders: 35” Rubicon Fenders: 37” In the box: Front track bar bracket (TX1953250) Front upper 2” bump stop strike pad kit Front lower 0,5" bump stop strike pad shim kit (2) Front sway bar link kit 11,5” Rear upper 1,5" bump stop strike pad kit Rear lower 0,5" bump stop strike pad shim kit (2) Rear sway bar link kit 13” 3,5” lift coil springs All necessary hardware Notes: Requires longer shocks Shocks NOT included (sold separately) Caster correction required Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels(sold separately) Models w/ plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately)
Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, and harshness Full range of movement for off-road flex and articulation Install and drive simple bolt-on installation – no welding required Max tyre diameter: 35" In the box: Front HD forged adjustable track bar Front brake line anchor kit Front sway bar disconnects Rear track bar bracket Rear sway bar links Front and rear coil springs (8) Fully adjustable Alpine flexarms SpeedBump bump stops Exhaust spacers All necessary hardware Notes: Requires longer shocks Not includes Shock absorbers, FOX absorbers recommended (sold separately) Requires aftermarket wheels w/ 4.5" backspacing or less – or Offset Wheel Adapters for stock wheels Driveshaft modifications may be necessary with this suspension system 2007-2011 JK/KU models will require Extended Length Front Brake Lines Cutting required Alignment required
Alpine's adjustable short control arms will balance wheel angles, toe-in and wheelbase for 0"-4.5" lifts Control arms made from 42mm x 4mm DOM tubing for maximum strength Mounts to factory control arm brackets Simple bolt-on installation - no welding required Front and rear progressive bump stops provide gradual compression during fast suspension movements. Reliable performance without worry Positive, responsive handling with reduced NVH High-quality, maintenance-free bushings provide excellent damping and ride quality Forged HD adjustable front tie rod improves steering response, centres the axle and reduces body roll Easily detachable front quick release control arms Full range of motion for flexibility and off-road performance In the box: Front 2,5” Lift coil spring kit Front HD Forged adjustable track bar (0-6” Lift) (2) Front lower 2” bump stop strike pad extensions Front sway bar quick disconnect kit (0-4,5” Lift) Front brake line anchor kit (2) Rear 0,5” Lift coil spring spacers (2) Rear lower 0,5” bump stop strike pad shim kit Rear 13” sway bar link kit (2,5-4,5” Lift) Front & Rear progressive bump stop kit (0-4,5” Lift) Alpine short control arm kit 8-Arm (0-4,5” Lift) All necessary hardware Notes: Shock absorbers (sold separately) required to be fitted 4.75" or smaller backspacing wheels or factory wheel spacers required (sold separately) Models with plastic bumpers require removal of cover to fit larger tyres Wheel alignment recommended after fitting Models with factory bumpers require bumper extensions (included) For diesel equipped vehicles, the lift height at the front will be 1" less, we recommend the use of TX1155100 spring washers (sold separately) Sport/Overland and Rubicon wings require 2" front and 1" rear Bump Stop/Strike Pad extensions/shims to fit 35" and 37" tyres respectively (included)
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion In the box: (2) Front coil spring Lift 2,5" (2) Front lower adjustable control arm Alpine (2) Front upper adjustable control arm Alpine Front forged adjustable track bar Front progressive bump stop kit Front bump stop extension kit Front bump stop strike pad shim kit Front sway bar quick disconnect kit Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop extension kit Rear progressive bump stop kit Rear track bar axle bracket (2) Rear lower adjustable control arm Alpine (2) Rear upper adjustable control arm Alpine (2) Rear coil spring Lift 2,5" All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2,5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required Requires longer shocks – Falcon Performance Shocks recommended (sold separately)
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion In the box: (2) Front coil spring Lift 2,5" Short control arm kit Alpine Front forged adjustable track bar Front track bar axle bracket Front progressive bump stop kit Front bump stop extension kit Front bump stop strike pad shim kit Front sway bar quick disconnect kit Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop extension kit Rear progressive bump stop kit Rear track bar axle bracket (2) Rear coil spring Lift 2,5" All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2,5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Max tyre diameter: Sport/Overland Fenders: 35" (w/ 3" front & 2,5" rear bump stops) Rubicon Fenders: 37" (w/ 2" front & 2.5" rear bump stops) In the box: (2) Front lower control arm Alpine (2) Front upper control arm Alpine (2) Front coil spring Front adjustable track bar Front sway bar quick disconnect kit Front bump stop spacers Front track bar relocation bracket Rear track bar axle bracket Rear forged sway bar kit Rear sway bar links Rear driveline spacer Rear upper control arms brackets Rear bump stop spacers Rear extended brake lines (2) Rear coil spring (2) Rear lower control arm Alpine (2) Rear upper control arm Alpine Coil spring retainer kit All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Alignment required Requires longer shocks, we recommended TeraFlex and Fox For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately)
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Simple bolt-on installation In the box: (2) Front coil spring Front track bar bracket (2) Front brake line anchors (2) Front longer sway bar links Front adjustable track bar Alpine (2) Front quick disconnect sway bar (2) Front lower adjustable control arm (2) Front upper adjustable control arm (2) Rear lower adjustable control arm (2) Rear upper adjustable control arm (2) Rear longer sway bar link Progressive bump stop kit TeraFlex Falcon (2) Rear coil spring Front and rear bump stop strike pad kit 2" Front and rear bump stop strike pad shim kit 0,5" All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required Requires longer shocks. We recommend Falcon shocks (sold separately)
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion In the box: (2) Front coil spring Lift 3,5" Short control arm kit Alpine Front forged adjustable track bar Front track bar axle bracket Front progressive bump stop kit Front bump stop extension kit Front bump stop strike pad shim kit Front sway bar quick disconnect kit Front brake line anchor kit Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop extension kit Rear progressive bump stop kit Rear track bar axle bracket (2) Rear coil spring Lift 3,5" All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required
Increases clearance Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration and harshness Full range of movement for off-road flex & articulation In the box: (8) Fully adjustable Alpine Flexarms CT Front HD forged adjustable track bar SpeedBump & progressive bump stop kit Front brake line anchor kit Front sway bar disconnects Rear track bar axle bracket Rear sway bar links Rear upper coil spring retainer kit Rear lower coil spring retainer kit Front and rear coil springs Exhaust spacers All necessary hardware Notes: Requires longer shocks, Not includes shock absorbers, FOX absorbers recommended (sold separately) Requires aftermarket wheels w/ 4.5” backspacing or less – or Offset Wheel Adapters for stock wheels TX1055000 (sold separately) Driveshaft modifications may be necessary with this suspension system TX1744014 (sold separately) 2007-2011 models will require extended length front brake lines (sold separately) Requires cutting Alignment required Max tyre diameter 35"
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Max tyre diameter: 33": Sport/Overland | (w/ 2" front & 1" rear bump stops) 35": Sport/Overland | (w/ 3" front & 2,5" rear bump stops) 35": Rubicon | (w/ 2" front & 1" rear bump stops) 37": Rubicon | (w/ 2" front & 2,5" rear bump stops) In the box: (2) Front upper adjustable long control arm Alpine (2) Front lower adjustable long control arm Alpine (2) Front coil spring Front bump stop spacers Front track bar relocation bracket Front quick disconnect sway bar kit Front adjustable track bar (2) Rear coil spring spacer Rear bump stop spacers (2) Rear upper adjustable long control arm Alpine (2) Rear lower adjustable long control arm Alpine Rear forged sway bar kit ST Rear driveline center support mount lowering spacer kit Rear track bar axle bracket kit Bracket kit for Alpine long arm Extended-travel shock accessory kit Coil spring retainer kit All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Alignment required Requires longer shocks, we recommended TeraFlex and Fox For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately) Requires cutting/removal of factory control arm bracketry to install Long Arm Brackets
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Max tyre diameter: Sport/Sahara Fenders: 35" (w/ 3" front & 2.5" rear bump stops) Sport/Sahara Fenders: 37" (w/ 3.5" front & 4" rear bump stops) Rubicon Fenders: 37" (w/ 2.5" front & 3" rear bump stops) In the box: (2) Front lower long control arm Alpine (2) Front upper long control arm Alpine Front forged adjustable track bar assembly w/ joint kit Front quick disconnect w/ swivel stud kit (2) Front coil spring Front track bar bracket (2) Front brake line anchor (2) Rear lower long control arm Alpine (2) Rear upper long control arm Alpine (2) Rear coil spring Rear track bar bracket Rear extended sway bar links Front & rear 2" bump stop strike pad kit Front & rear 0,5" bump stop strike pad shim kit Progressive bump stop kit Long arm bracket kit All necessary hardware Notes: The kit does NOT include shock absorbers, we recommend using TeraFlex or Fox
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Full range of movement for off-road flex and articulation In the box: Front adjustable track bar Alpine (2) Front coil spring Front track bar bracket (2) Front brake line anchors Bracket kit for Alpine long arm (2) Front quick disconnect sway bar kit (2) Front upper adjustable long control arms Alpine (2) Front lower adjustable long control arms Alpine (2) Rear upper adjustable long control arms Alpine (2) Rear lower adjustable long control arms Alpine (2) Rear coil spring Rear track bar bracket (2) Rear extended sway bar link Front & rear 2" bump stop strike pad kit Front & rear 0,5" bump stop strike pad shim kit Progressive bump stop kit Falcon Hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Sport/Sahara Fenders require 3” front and 2.5” rear bump stop extensions and shims (included) in order to fit 35” tyres Sport/Sahara Fenders require 3.5” front and 4” rear bump stop extensions and shims (included) in order to fit 37” tyres Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims (included) in order to fit 37” tyres Alignment required Requires longer shocks, Falcon Performance Shocks recommended (sold separately) Aftermarket High Fenders required to fit 39”+ tires. Bump Stop Extension and Shim requirements will vary based on setup. Installer must check for clearances May require an additional 0.5” Bump Stop Strike Pad Shim Kit TX1959300 (sold separately) Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets
Dependable performance w/ zero worries Positive, responsive handling w/ reduced NVH High-quality, maintenance-free factory-style bushings provide excellent vibration damping and ride quality Full range of movement for off-road flex and articulation Install and drive simple bolt-on installation – no welding required Control arms include IR bushings In the box: Front coil spring Lift 2,5" Alpine IR Short control arm kit Front sway bar quick disconnect kit Front HD forged adjustable track bar Rear HD forged adjustable track bar Rear track bar axle bracket Front SpeedBump & Progressive bump stop kit Rear SpeedBump & Progressive bump stop kit Front bump stop strike pad extension kit Rear bump stop strike pad extension kit Front bump stop strike pad shim kit Rear bump stop strike pad shim kit Rear coil spring Lift 2,5" Rear sway bar link kit w/ Swivel Stud All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required
Adjustable Alpine IR Short Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4,5” lift kits Alpine IR Short Control Arms are constructed from durable 42mm x 4mm wall DOM tube for maximum strength Bolts to the factory control arm mounting brackets Install and drive simple bolt-on installation – no welding required Delivers true Rogue Trail (RT) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced NVH Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping Maintenance-free IR Bushings improve on- and off-road ride quality and performance Front and Rear HD forged adjustable track bars improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling Front SpeedBump and Rear Progressive Bump Stops provide progressive compression during high-speed suspension movement Features Front sway bar quick disconnects Full range of movement for off-road flex and articulation Install and drive simple bolt-on installation – no welding required In the box: Front Lift coil spring kit 2,5" Front HD Forged adjustable track bar (0-6” Lift) Front Sway Bar Quick Disconnect Kit (0-4,5” Lift) Front brake line anchor kit (2) Rear Lift coil spring spacers 0.5" Rear HD Forged adjustable track bar (0-6” Lift) Rear 13" sway bar link kit (2,5-4,5” Lift) Front & Rear SpeedBump & Progressive Bump Stop Kit (2,5-3,5” Lift) Alpine IR short control arm kit – 8-Arm (0-4,5” Lift) All necessary hardware Notes: Requires longer shocks (sold separately) Requires aftermarket wheels w/ 4.75” backspacing or less – or offset wheel adapters for stock wheels (not included) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tires All OEM fenders require 2” Front and 1” Rear bump stop extensions to fit 35” tires (included) Alignment required For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately)
Dependable performance w/ zero worries Increased suspension articulation along with superior ride quality and performance regardless of terrain High-quality, maintenance-free IR Bushings allow unrestricted rotation during droop for less overall bind during articulation as well as improved ride quality Install and drive simple bolt-on installation - no welding required Unprecedented smooth and quiet ride both on- and off-road thanks to the control arms and bushings Control arms include IR bushings In the box: Front coil springs Front adjustable IR track bar Front sway bar links Front brak line anchor kit Rear track bar Rear coil springs Rear track bar bracket Rear sway bar links Alpine IR Control Arm Kit (8-Arm Adjustable) SpeedBump & Progressive Bump Stop Kit Hardware Notes: Requires aftermarket wheels w/ 4.75" backspacing or less Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35" or larger tyres Sport/Sahara Fenders require 3" front and 2.5" rear bump stop extensions and shims (included) in order to fit 35" tyres Rubicon Fenders require 2" front and 2" rear bump stop extensions (included) in order to fit 35" tyres Rubicon Fenders require 2.5" front and 3" rear bump stop extensions and shims (included) in order to fit 37" tyres Alignment required Requires longer shocks, Falcon SP2 Mode Adjust Performance Shocks recommended (sold separately)
Lift height: 3,5" Excellent performance on the trail as well as on the road Reliable Increases ground clearance Easy to install Control arms include IR bushings Max tyre diameter: Sport/Overland Fenders: 35” (w/ 3” front and 2,5” rear bump stops) Rubicon Fenders: 37” (w/ 2” front and 2,5” rear bump stops) In the box: Front coil springs (8) Alpine IR adjustable control arm kit Font forged adjustable track bar Assembly W/ Joint kit (2) Front quick disconnect w/ Swivel Stud kit boxed 0-4" Front hydraulic SpeedBump bump stops Rear coil springs Rear track bar Rear progressive bump stops Rear upper / lower spring retainer kit Rear Trail Rate dorged S/T sway bar kit Driveline spacer kit Extended travel accessory kit Rear track bar forged adjustable assembly W/ Joint kit Spring base kit RT Front and rear track bar brackets All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Alignment required Requires longer shocks, we recommended TeraFlex and Fox For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately)
Lift height: 3,5" Excellent performance on the trail as well as on the road Increases ground clearance Control arms include IR bushings Max tyre diameter: Sport/Sahara Fenders: 35" (w/ 3" front & 2.5" rear bump stops) Rubicon Fenders: 35" (w/ 2" front & 2" rear bump stops) Rubicon Fenders: 37" (w/ 2.5" front & 3" rear bump stops) In the box: (2) Front coils spring Front adjustable track bar Alpine (2) Front quick disconnect sway bar kit (2) Front upper adjustable control arm Alpine IR (2) Front lower adjustable control arm Alpine IR (2) Rear upper adjustable control arm Alpine IR (2) Rear lower adjustable control arm Alpine IR Rear track bar HD adjustable (2) Rear extended sway bar link (2) Rear coil spring Rear track bar bracket Bump stop kit TeraFlex SpeedBump/Falcon All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Requires alignment Requires longer shocks. We recommend Falcon shocks (sold separately)
Lift height: 3,5" Excellent performance on the trail as well as on the road Increases ground clearance Easy to install Control arms include IR bushings Max tyre diameter: Sport/Sahara Fenders: 35" (w/ 3" front & 2.5" rear bump stops) Rubicon Fenders: 35" (w/ 2" front & 2" rear bump stops) Rubicon Fenders: 37" (w/ 2.5" front & 3" rear bump stops) In the box: (2) Front coils spring Front adjustable track bar Alpine (2) Front quick disconnect sway bar kit (2) Front upper adjustable control arm Alpine IR (2) Front lower adjustable control arm Alpine IR (2) Rear upper adjustable control arm Alpine IR (2) Rear lower adjustable control arm Alpine IR Rear track bar HD adjustable (2) Rear extended sway bar link (2) Rear coil spring Rear track bar bracket Bump stop kit TeraFlex SpeedBump/Falcon All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Requires alignment Requires longer shocks. We recommend Falcon shocks (sold separately)
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Control arms include IR bushings Max tyre diameter: 33": Sport/Overland | (w/ 2" front & 1" rear bump stops) 35": Sport/Overland | (w/ 3" front & 2.5" rear bump stops) 37": Sport/Overland | (w/ 4" front & 3.5" rear bump stops) 35": Rubicon | (w/ 2" front & 1" rear bump stops) 37": Rubicon | (w/ 2" front & 2.5" rear bump stops) 39": Rubicon | (w/ 4" front & 3" rear bump stops) In the box: (2) Front coil spring Front track bar bracket Front control arm bracket Front bump stops Front quick disconnect sway bar kit Front forged adjustable track bar (2) Front lower long arm Alpine IR (2) Front upper long arm Alpine IR (2) Rear lower long arm Alpine IR (2) Rear upper long arm Alpine IR (2) Rear coil spring Rear adjustable track bar Rear driveline center support mount lowering spacer kit Rear forged sway bar kit ST Rear track bar bracket Front and rear bump stop strike pad shim kit Brake line anchor kit Progressive bump stops Coil spring retainer kit Extended-travel shock accessory kit Transmission skid plate and long arm crossmember reinforcement Bracket kit for Alpine long arm Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Alignment required Requires longer shocks, we recommended TeraFlex and Fox For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately) Requires cutting/removal of factory control arm bracketry to install Long Arm Brackets
Lift Height:4,5” Dependable performance w/ zero worries Positive, responsive handling Full range of movement for off-road Install and drive All factory stability controls remain functional In the box: Front Track Bar Axle Bracket (TX1953500) Front Sway Bar Link Kit Rear Track Bar Axle Bracket (TX1953600) Rear Sway Bar Link Kit w/ Swivel Stud Front & rear 4.5” Lift Coil Spring Kits Front & rear 2” Bump Stop Strike Pad Extension Kit Front & rear 0,5” Bump Stop Strike Pad Shim Kit All necessary hardware Max Tyre Diameter: Sport/Sahara : 35” (w/ 3” front & 2.5” rear bump stops) Sport/Sahara : 37” (w/ 3.5” front & 4” rear bump stops) Rubicon : 37” (w/ 2.5” front & 3” rear bump stops) Notes: Caster correction required Sport & Sahara models require aftermarket wheels w/ 4.5” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Sport/Sahara models require the INCLUDED 0.5” front & 0.5” rear bump stop strike pad shims in order to fit 35” tyres Sport/Sahara models require an additional 0.5” Front & Rear Bump Stop Strike Pad Shim Kit TX1959300 (sold separately) in order to fit 37” tyres Rubicon models require the INCLUDED 0.5” front & 0.5” rear bump stop strike pad shims in order to fit 37” tyres JL/JLU: Front Control Arm Sport Brackets (# 1938125) recommended to correct caster angles and restore factory geometry Requires longer shocks (sold separately)
Increased ground clearance Easy installation Gives aggressive look Max tyre diameter: Sport/Overland Fenders: 37” Rubicon Fenders: 38” In the box: Front track bar Axle bracket (4,5-6” Lift) Front lower 2” bump stop strike pad Extensions Front lower 0,5” bump stop strike pad shims Front 11,5” sway bar Link kit w/ swivel stud (2,5-4,5” Lift) Front & rear 4,5” Lift Coil spring kits Rear upper 1,5” bump stop extension kit Rear upper 0,5” bump stop shim kit Rear lower 0,5” bump stop strike Pad shim kit Rear 13” sway bar Link kit w/ swivel stud (2,5-4,5” Lift) All necessary hardware Notes: Caster correction REQUIRED NOT INCLUDED Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tires Sport/Overland fenders and Rubicon fenders require 4” Front and 3” Rear Bump Stop/Strike Pad Extensions/Shims to fit 37 tires and 38” tires, respectively Requires additional components EcoDiesel models require 1” front coil spring spacers TX1155100 (sold separately) Alignment required Requires longer shocks (sold separately)
Lift Height: 2,5” Increase ground clearance Levels the front with the rear of the vehicle Positive, responsive handling Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: (2) Front sway bar links 11,5” (2) Rear sway bar links 10,75” Front and rear 2" bump stop strike pad kit Front and rear 0,5" bump stop strike pad shim kit 2,5” lift coil springs (4) 9550 VSS shocks Hardware Notes: Sport & Sahara models require aftermarket wheels with 4,5” backspacing or less – or Offset Wheel Adapters for stock wheels Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tire
Lift height: 2,5” Install & drive simple bolt-on installation – no welding required Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH) Preset front lower Sport flexarms optimize correct caster & pinion angles for 2.5-3.5” lift kits Falcon Progressive bump stops provide progressive compression during high-speed suspension movement Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35" Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front coil spring Lift 2,5" Front lower sport control arm kit Front progressive bump stop Front bump stop strike pad extension kit Front bump stop strike pad shim kit Front sway bar quick disconnect kit RHD Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop strike pad extension kit Rear progressive bump stop Rear track bar axle bracket RHD Rear coil spring Lift 2,5" All necessary hardware Notes: Fits right-hand drive models ONLY Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyre Alignment required Does NOT include shocks, we recommend FOX Shock absorbers for superior performance (sold separately) NOT recommended for vehicles with heavy load. If you have any doubts, please contact our sales department NOT recommended for Diesel models For Diesel models spacer load level kit TX1155100 is required (sold separately)
Lift height: 2,5” Increases ground clearance Max tyre diameter: Rubicon (w/ 2” front & 2” rear bump stops): 35” Rubicon (w/ 2.5” front & 3” rear bump stops): 37” In the box: Front 3” lift spring spacers (2) Longer front sway bar links 11,5” Rear 2,5” lift spring spacers (2) Longer rear sway bar links 10,75" Front & rear 2" bump stop strike pad kit (TX1959500) All necessary hardware Notes: Fits Rubicon models ONLY Taller spacers in the front corrects the factory nose-down rake Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Rubicon models require JL/JLU Bump Stop Strike Pad Shim Kit TX1959300 in order to fit 37” tyres (sold separately) Requires Shock Extensions TX1985200 or longer shocks (sold separately) JL/JLU: Front Lower Sport Flexarms TX1253000 or Front Control Arm Sport Brackets TX1938125 recommended to optimize caster and pinion angles (sold separately) For Jeep JL 4XE may require replacement of the front drive shaft