Kit suspension Rough Country +4" Jeep Wrangler (2006-2017) JK

• Proudly made in the USA
• Easy bolt-on installation
• Increased ground clearance
• Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more efficiently

Lift Kit consists of:

• Front lifted coil springs
• Front track bar bracket
• Front pitman arm
• Front brake line brackets
• Front shock relocation brackets
• Front cam bolts
• Rear lifted coil springs
• Rear extended sway bar links
• Rear track bar drop bracket
• Rear brake line relocation brackets
• Rear coil correction plates
• (4) Premium N3 shocks
• Hardware

Notes:

• 12-18 models require exhaust modifications to clear the front driveshaft RC1030 (sold separately)
• If using stock wheels 1,5" wheel spacers are required
• On Automatic equipped vehicles, due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft