Boutique (Page 8)

Proudly made in the USA Easy bolt-on installation Improves the angle of the rear spring by 10 degrees Allows the springs to operate more efficiently In the box: (2) Coil spring plate

Easy installation High durability Sold in pairs

Powder-coated with a flexible polyester-based paint, which increases corrosion protection The material used and the production technology guarantee the preservation of the physical properties of the product for many years Designed to withstand the increased load of the car (winch, steel bumper) Diameter: 0.625" Rate: 200 lbs Length: 13.75” In the box: (2) Rear coil spring

Powder-coated with a flexible polyester-based paint, which increases corrosion protection The material used and the production technology guarantee the preservation of the physical properties of the product for many years Designed to withstand the increased load of the car (winch, steel bumper) Diameter: 0.625" Full compression: 200 lbs Length: 14.75" In the box: (2) Spring

Made in the USA Extremely durable materials Ensures smooth and excellent on and off-road handling Absolutely the best, most durable coil springs available on the market In the box: (2) Rear coil springs  Notes: Coil springs 4,5" for Grand Cherokee WJ/WG Coil springs 5,5" for Wrangler TJ/LJ

Made in the USA Extremely durable materials Ensures smooth and excellent on and off-road handling Absolutely the best, most durable coil springs available on the market In the box: (2) Rear coil springs +4" 

Heavy duty construction Polyester based powder coated Material used and the manufacturing process guarantees the physical properties of the product for many years Sold in pairs  

Durable materials Powder coated for superior element protection Shot peened to reduce spring sag & fatigue as well as increase life Easy installation In the box: (2) Rear coil springs

Durable materials Powder coated for superior element protection Shot peened to reduce spring sag & fatigue as well as increase life Easy installation In the box: (2) Rear coil springs

Durable materials Powder coated for superior element protection Shot peened to reduce spring sag & fatigue as well as increase life Easy installation In the box: (2) Rear coil springs

Durable materials Powder coated for superior element protection Shot peened to reduce spring sag & fatigue as well as increase life Easy installation In the box: (2) Rear coil springs

Made in USA Made from Dura-Flex 2000 TPO Provides ultimate protection against damage Great look High quality product Easy installation, no drilling required Sold in pairs In the box: (2) Rear corner covers

Solid steel construction Double powder coated Ability to bolt the stock fenders back on Ability to bolt SMITTYBILT fenders Protect tail lights Require drilling Price for 2 pieces (L + R)

After lifting your Jeep TJ a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft Includes Brute Force Red seals Includes better quality CV joints Shaft strength is twice as strong as the factory equipped drive shaft Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the bottom of your Jeep Dimensions: Collapsed measurement: 36,2 cm Extended measurement: 45 cm Notes: Does NOT fit Rubicon and Rubicon Unlimited models Does NOT fit: 97-02 models with 4cyl engine and 3-speed auto transmission 05-06 models with 2.4L 4cyl engine and 6-speed manual transmission SYE kit is required for installation RC50-7907 (sold separately)

After lifting your Jeep TJ a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft Includes Brute Force Red seals Includes better quality CV joints Shaft strength is twice as strong as the factory equipped drive shaft Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the bottom of your Jeep Dimensions: Collapsed measurement: 36,2 cm Extended measurement: 45 cm Notes: Fits models with automatic transmission ONLY Does NOT fit Rubicon and Rubicon Unlimited models Does NOT fit 97-02 models with 4cyl engine and 3-speed auto transmission SYE kit is required for installation RC50-7907 (sold separately)

Proudly made in the USA After lifting your Jeep TJ a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft Includes Brute Force Red seals Includes better quality CV joints Shaft strength is twice as strong as the factory equipped drive shaft Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the bottom of your Jeep Dimensions: Collapsed measurement: 42,86 cm Extended measurement: 51,12 cm Notes: Fits Rubicon models ONLY

Proudly made in the USA Easy bolt-on installation Protects your differential from off-road hazards Highly durable, constructed from 1/4" steel Fits Dana 35 axle In the box: Differential guard Hardware

Improved braking performance over factory brake system Easy installation  High quality In the box: (2) Rear brake caliper w/ 46mm piston  (2) Rear solid brake rotor  (2) Rear disc brake mounting plate  (4) Rear disc brake conversion brake pads  Rear disc brake hose kit  Emergency brake cables Brake preload spacer Hardware

Stainless steel outer shell  Pressure tested to 4000 psi / 275 bar 18" (46cm) long Built to DOT specifications In the box: (1) Rear brake line Hardware

Include hardware Pressure tested to 4000 psi/275 bar Braided stainless steel exterior

Massive 1,25" outside diameter Made of forged solid steel for unsurpassed strength and durability Includes Clevite brand OEM style rubber bushings Nearly double the weight of your factory track bar Fully adjustable while mounted on the Jeep for a proper fit Perfectly center your Jeep's rear axle     Notes: Models equipped with 4-6" of lift will require a rear track bar bracket  

Mount to roll cage Durable material, provides firm grab Adjustable stripes for the best fitting Black color Sold in pairs Notes: Front grab handles available TX4830300 (sold separately)

Allows to fine tune the rear suspension Bushing reduces front wheel shimmy, improve durability and tunability Black powder coat finish Heavy duty construction Allows adjustment  Notes: Fits rear track bar joint rebuilt kit TX1951600 (sold separately)

Advanced foam-cell technology Vehicle specific multi-stage valving Increased fluid capacity for max heat dissipation 180° directional mounting Construction ensures solid contact between tire and road Twin tube construction Chrome plated shaft Sintered iron piston Black boot included Dimensions: Extended: 19.07" Compressed: 12.07" Travel: 7" Mounts: Top mount: bar pin Bottom mount: eyelet

Advanced foam-cell technology Vehicle specific multi-stage valving Increased fluid capacity for max heat dissipation 180° directional mounting Construction ensures solid contact between tire and road Twin tube construction Chrome plated shaft Sintered iron piston Black boot included Dimensions: Extended: 22,58" Compressed: 13,71" Travel: 8,87" Mounts: Top mount: bar pin Bottom mount: eyelet Notes: Fits with 4WD models ONLY

Advanced foam-cell technology Vehicle specific multi-stage valving Increased fluid capacity for max heat dissipation 180° directional mounting Construction ensures solid contact between tire and road Twin tube construction Chrome plated shaft Sintered iron piston Black boot included Dimensions: Extended: 24,84" Compressed: 14,82" Travel: 10,02" Mounts: Top mount: bar pin Bottom mount: eyelet Notes: Fits with 4WD models ONLY

Advanced foam-cell technology Vehicle specific multi-stage valving Increased fluid capacity for max heat dissipation 180° directional mounting Construction ensures solid contact between tire and road Twin tube construction Chrome plated shaft Sintered iron piston Black boot included Dimensions: Extended: 27,07" Compressed: 15,94" Travel: 11,13" Mounts: Top mount: bar pin Bottom mount: eyelet

Multi- stage velocity sensitive valving Twin tube construction Bonded iron piston Chromed piston rod with micro pores Dimensions: Extended: 19,07" Compressed: 12,07" Travel: 7" Mounts: Top mount: bar pin Bottom mount: eyelet Notes:  Shock must be mounted body down Jeep Wrangler TJ 97-06 fits with 4WD Unlimited Rubicon models ONLY Jeep Wrangler LJ 04-06 fits with 4WD models ONLY

Multi-stage velocity sensitive valving Twin tube construction 14 mm piston rod Improves driving comfort Dimensions: Extended: 22,58" Compressed: 13,71" Travel: 8,87" Mounts: Top mount: bar pin Bottom mount: eyelet Notes: Shock must be mounted body down Jeep Wrangler TJ 97-06 fits with 4WD models ONLY Jeep Wrangler LJ 04-06 fits with 4WD models ONLY

Multi-stage velocity sensitive valving Twin tube construction 14 mm piston rod Improves driving comfort Dimensions: Extended: 24,84" Compressed: 14,82" Travel: 10,02" Mounts: Top mount: bar pin Bottom mount: eyelet Notes: Shock must be mounted body down Fits with 4WD models ONLY

Multi- stage velocity sensitive valving Twin tube construction Bonded iron piston Chromed piston rod with micro pores Dimensions: Extended: 27,07" Compressed: 15,94" Travel: 11,13" Mounts: Top mount: bar pin Bottom mount: eyelet Notes: Shock must be mounted body down Fits with 4WD models ONLY

Adjustable arm design utilizing a forged adjustable flex end and jam nut Improved caster and axle positioning on 0-6" lifts using the factory mounting locations Forged end is fully rebuildable and greaseable 1-1/4"-12 threads provide ultimate strength and fine-tune adjustability Factory style rubber bushings at the non-adjustable ends for quite, maintenance-free operation CNC formed for proper tire, frame and axle mount clearance Sold in pairs

Fully greasable Increased longevity Upper joints pivot up to 20 degrees Lower joints pivot up to 35 degrees Allow for greater articulation off-road In the box: Rear lower adjustable control arms Flex joints Nuts and grease fittings

Balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4" lift kits Constructed from durable 1.75" x 0.25" wall DOM tube for maximum strength Bolts to the factory control arm mounting brackets Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase Full range of movement will not restrict articulation or flex off-road Rebuildable joint for easy maintenance Premium black e-dipped coating on tube provides superior durability and corrosion resistance Dimensions: Factory length (inch/cm): 15 3/4" / 40 cm Min. length (inch/cm): 14 15/16" / 37,94 cm Max. length (inch/cm): 17 5/16" / 43,97 cm Both ends (inch/cm): 14 mm bolt

Superior strength compared to OEM control arms and can be used with OEM upper control arms Increases clearance to the factory axle brackets for improved front suspension droop travel Lengthened over stock in order to properly correct caster on 2-4,5" lifts Made from 2" x 1/4" wall DOM tubing Premium Clevite brand rubber bushings absorb noise and reduce vibrations for a quiet, comfortable ride and maintenance free operation Durable Powder Coat finish provides excellent protection from corrosion and debris Sold in pairs

Allow for greater articulation off-road Tubular construction Include Clevite brand OEM style rubber bushings  

for use in Jeep Wrangler TJ/LJ Dana 44 rear kits contain top-quality Timken bearings Made in USA

46mm monotube design ensures consistent, fade-free performance in all conditions Patented degressive valving instantly reacts to changing surface conditions OEM certified mounting hardware allows for easy installation Zinc plated for resistance against harsh elements Durable vulcanized neoprene rubber bushings Dimensions: Extended: 19,96" Compressed: 12,81" Travel: 7,15" Mounts: Top mount: bar pin Bottom mount: eyelet

46mm monotube design ensures consistent, fade-free performance in all conditions Patented degressive valving instantly reacts to changing surface conditions OEM certified mounting hardware allows for easy installation Zinc plated for resistance against harsh elements Durable vulcanized neoprene rubber bushings Dimensions: Extended: 25,00" Compressed: 15,41" Travel: 9,59" Mounts: Top mount: bar pin Bottom mount: eyelet Notes: When used with long arms, it fits a lift of 3,5" ONLY

46mm monotube design ensures consistent, fade-free performance in all conditions Patented degressive valving instantly reacts to changing surface conditions OEM certified mounting hardware allows for easy installation Zinc plated for resistance against harsh elements Durable vulcanized neoprene rubber bushings Dimensions: Extended: 23,07" Compressed: 14,63" Travel: 8,44" Mounts: Top mount: bar pin Bottom mount: eyelet

2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time Clear-anodized for a durable finish Internal IFP mono-tube reservoir design Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Race-developed high-flow piston design Application specific valving to maximize performance Redundant sealing pack system main seal, wiper seal, scraper seal JM92 Advanced Suspension Fluid for improved performance at variable temperatures Quiet nitrile rubber allows for increased suspension articulation Dimensions: Extended: 19.52" Compressed: 12.90" Travel: 6.62" Mounts: Top mount: bar pin Bottom mount: eyelet

2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time Clear-anodized for a durable finish Internal IFP mono-tube reservoir design Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Race-developed high-flow piston design Application specific valving to maximize performance Redundant sealing pack system main seal, wiper seal, scraper seal JM92 Advanced Suspension Fluid for improved performance at variable temperatures Quiet nitrile rubber allows for increased suspension articulation Dimensions: Extended: 22.72" Compressed: 14.60" Travel: 8.12" Mounts: Top mount: bar pin Bottom mount: eyelet

2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time Clear-anodized for a durable finish Internal IFP mono-tube reservoir design Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Race-developed high-flow piston design Application specific valving to maximize performance Redundant sealing pack system main seal, wiper seal, scraper seal JM92 Advanced Suspension Fluid for improved performance at variable temperatures Quiet nitrile rubber allows for increased suspension articulation Dimensions: Extended: 24.81" Compressed: 15.70" Travel: 9.11" Mounts: Top mount: bar pin Bottom mount: eyelet

2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time Clear-anodized for a durable finish Internal IFP mono-tube reservoir design Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Race-developed high-flow piston design Application specific valving to maximize performance Redundant sealing pack system main seal, wiper seal, scraper seal JM92 Advanced Suspension Fluid for improved performance at variable temperatures Quiet nitrile rubber allows for increased suspension articulation Dimensions: Extended: 27.52" Compressed: 17.40" Travel: 10.12" Mounts: Top mount: bar pin Bottom mount: eyelet

2.0" Impact extruded 6061-T6 aluminum will resist rust over time Clear-anodized for a durable finish 2.0" Smooth bore 6061-T6 Aluminum is hard anodized Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Race-developed high-flow piston design Application specific valving to maximize performance JM92 Advanced Suspension Fluid for improved performance at variable temperatures LSC - Low Speed Compression Dimensions: Extended: 23.02" Compressed: 14.40" Travel: 8.62" Mounts: Top mount: bar pin Bottom mount: eyelet Notes: Includes reservoir mounting

2.0" Impact extruded 6061-T6 aluminum will resist rust over time Clear-anodized for a durable finish 2.0" Smooth bore 6061-T6 Aluminum is hard anodized Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Race-developed high-flow piston design Application specific valving to maximize performance JM92 Advanced Suspension Fluid for improved performance at variable temperatures LSC - Low Speed Compression Dimensions: Extended: 25.02" Compressed: 15.40" Travel: 9.62" Mounts: Top mount: bar pin Bottom mount: eyelet Notes: Includes reservoir mounting

2.0" Impact extruded 6061-T6 aluminum will resist rust over time Clear-anodized for a durable finish 2.0" Smooth bore 6061-T6 Aluminum is hard anodized Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Race-developed high-flow piston design Application specific valving to maximize performance JM92 Advanced Suspension Fluid for improved performance at variable temperatures Dimensions: Extended: 23.02" Compressed: 14.40" Travel: 8.62" Mounts: Top mount: bar pin Bottom mount: eyelet Notes: Includes reservoir mounting

2.0" Impact extruded 6061-T6 aluminum will resist rust over time Clear-anodized for a durable finish 2.0" Smooth bore 6061-T6 Aluminum is hard anodized Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Race-developed high-flow piston design Application specific valving to maximize performance JM92 Advanced Suspension Fluid for improved performance at variable temperatures Dimensions: Extended: 25.02" Compressed: 15.40" Travel: 9.62" Mounts: Top mount: bar pin Bottom mount: eyelet Notes: Includes reservoir mounting

2.0" Impact extruded 6061-T6 aluminum will resist rust over time Clear-anodized for a durable finish 2.0" Smooth bore 6061-T6 Aluminum is hard anodized Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Race-developed high-flow piston design Application specific valving to maximize performance JM92 Advanced Suspension Fluid for improved performance at variable temperatures Dimensions: Extended: 27.52" Compressed: 16.40" Travel: 11.12" Mounts: Top mount: bar pin Bottom mount: eyelet Notes: Includes reservoir mounting

High-pressure nitrogen-gas filled monotube design  Extra-large 46mm bore 180? directional mounting is perfect for custom set ups Low operation temperature Internal bump stops No fade or lag makes for consistent performance Perfect for lifted vehicles High quality product Dimensions: Extended: 19,07" Compressed: 12,07"  Travel: 7" Mounts: Top mount: bar pin Bottom mount: eyelet Notes: Jeep Wrangler TJ 97-06 fits with 4WD models ONLY