Filtres
Professional set, matched to the car Improves handling Adapted to both on-road and off-road conditions Improves the behavior of the car Control arms specs: Solid and durable construction for years High quality bushings provide excellent vibrations protect Anodized aluminum clamp collar Forged threated joints Premium black e-dipped coating for corrosion resistance Fully adjustment and maintenance-free IR bushings specs: Direct replacement for factory-style control arm bushings Inner sleeve provides 360 degrees of rotation for unrestricted movement at full droop Rotating sleeve features an extremely tough, hardened bearing surface Eliminates rotational stress and reduces bushing bind Provides excellent noise, vibrations, and harshness (NVH) damping Improves on- and off-road ride quality and performance Bushings are factory lubricated and permanently sealed Dimensions: Factory length (inch/cm): 19 3/4'' / 50,17 cm Min length (inch/cm): 19 13/16'' / 50,32 cm Max length (inch/cm): 21 1/16'' / 53,5 cm Both ends: 14 mm bolt In the box: Rear lower left control arm Rear lower right control arm
Solid and durable construction for years High quality bushings provide excellent vibrations protect Anodized aluminum clamp collar Forged threated joints Premium black e-dipped coating for corrosion resistance Fully adjustment and maintenance-free IR bushings specs: Direct replacement for factory-style control arm bushings Inner sleeve provides 360 degrees of rotation for unrestricted movement at full droop Rotating sleeve features an extremely tough, hardened bearing surface Eliminates rotational stress and reduces bushing bind Provides excellent noise, vibrations, and harshness (NVH) damping Improves on- and off-road ride quality and performance Bushings are factory lubricated and permanently sealed Dimensions: Factory length (inch/cm): 19 3/4'' / 50,17 cm Min length (inch/cm): 19 13/16'' / 50,32 cm Max length (inch/cm): 21 1/16'' / 53,5 cm Both ends: 14 mm bolt In the box: Rear lower left control arm Rear lower right control arm Notes: Alignment required
Adjustable Long Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6” lift kits Alpine Long Control Arms are constructed from durable 50mm x 5mm wall DOM tube for maximum strength Install and drive simple bolt-on installation – no welding required Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase Full range of movement will not restrict articulation or flex off-road Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping Maintenance-free IR Bushings improve on- and off-road ride quality and performance Zero maintenance forged threaded joints for smooth quiet flex Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Dimensions: Tube Diameter & Wall = 50mm x 5mm Factory Length = 23-3/4" Min. Length = 47-3/4" Max. Length = 49" In the box: Rear lower left adjustable control arm Rear lower right adjustable control arm Notes: Require brackets TX1968000 (sold separately) Require alignment
Adjustable Long Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6” lift kits Alpine Long Control Arms are constructed from durable 50mm x 5mm wall DOM tube for maximum strength Install and drive simple bolt-on installation – no welding required Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase Full range of movement will not restrict articulation or flex off-road Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping Maintenance-free IR Bushings improve on- and off-road ride quality and performance Zero maintenance forged threaded joints for smooth quiet flex Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Dimensions: Tube Diameter & Wall = 50mm x 5mm Factory Length = 19-3/4” Min. Length = 36-1/4” Max. Length = 37-3/8” In the box: Rear lower left adjustable control arm Rear lower right adjustable control arm Notes: Require cutting/removal of factory control arm bracketry to install Long Arm Brackets Require bracket kit TX1958002 (for Jeep JL 2 door) or TX1958000 (for Jeep JL 4 door) (sold separately) Require alignment
Balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6" lift kits Constructed from durable 50mm x 5mm wall DOM tube for maximum strength High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality Zero maintenance forged threaded joints for smooth quiet flex Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Premium black e-dipped coating for corrosion resistance Dimensions: Factory length: 19 3/4'' / 50,16 cm Min length: 35 3/4'' / 90,8 cm Max length: 37 1/4'' / 94,61 cm Both ends: 14 mm bolt In the box: Rear lower left control arm Rear lower right control arm Notes: Alignment required Require Alpine long arm bracket kit (TX1958002 for Jeep JL 2 Door, TX1958000 for Jeep JL 4 Door, TX1968000 for Jeep JT) (sold separately)
Solid and durable construction for years High quality bushings provide excellent vibrations protect Anodized aluminum clamp collar Forged threated joints Premium black e-dipped coating for corrosion resistance Fully adjustment and maintenance-free Dimensions: Factory length (inch/cm): 23-3/4” Min length (inch/cm): 47-3/4" Max length (inch/cm): 49" Both ends: 16 mm bolt In the box: Rear lower left control arm Rear lower right control arm Notes: Requires brackets TX1968000 (sold separately) Requires alignment Requires cutting/removal of factory control arm brackets to install Alpine long arm brackets
Balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6" lift kits Constructed from durable 50mm x 5mm wall DOM tube for maximum strength High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality Zero maintenance forged threaded joints for smooth quiet flex Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Premium black e-dipped coating for corrosion resistance Sold in pairs In the box: Rear lower left control arm Rear lower right control arm Notes: Requires cutting and welding Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets Must be used w/ Alpine Long Arm Bracket Kit TX1957000 (sold separately)
Adjustable Alpine short control arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4,5" lift kits Constructed from durable 42mm x 4mm wall DOM tube for maximum strength Bolts to the factory control arm mounting brackets High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality Zero maintenance forged threaded joints for smooth quiet flex Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Premium black e-dipped coating for corrosion resistance Sold in pairs Dimensions: Factory length: 19-3/4" / 50cm Min length: 19-13/16'' / 50cm Max length: 21-1/16'' / 53,5cm Both ends: 14 mm bolt In the box: Rear lower left control arm Rear lower right control arm
(2) Rear lower adjustable control arm Maintenance free, dual durometer, self-centering Giiro Joints Giiro joints to isolate road noise and vibration Bolt in design Made in the USA Dimensions: Center to Center STOCK = 19,764" Center to Center MIN = 19,686" Center to Center MAX = 20,566"
(2) Rear lower adjustable control arm Maintenance free, dual durometer, self-centering Giiro Joints Giiro joints to isolate road noise and vibration Bolt in design Made in the USA Dimensions: Center to Center STOCK = 23,750" Center to Center MIN = 23,4375" Center to Center MAX = 25,125"
(2) Rear lower control arm Bolt in design Johnny Joints to provide superior flex Custom 5" long upper adjuster for maximum front caster angle adjustment Giiro Joint to isolate road noise & vibration Lower bent for tyre clearance Dimensions: Center to Center STOCK = 23-3/4" Center to Center MIN = 23-13/16" Center to Center MAX = 24-9/16"
Adjustable Alpine short control arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 2-4" lift kits Constructed from durable 42mm x 4mm wall DOM tube for maximum strength Bolts to the factory control arm mounting brackets High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality Zero maintenance forged threaded joints for smooth quiet flex Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Premium black e-dipped coating for corrosion resistance Sold in pairs Dimensions: Factory length (inch/cm): 19-3/4'' / 50 cm Min. length (inch/cm): 19-13/16'' / 50 cm Max length(inch/cm): 21-1/16'' / 53,5cm In the box: Rear lower left control arm Rear lower right control arm Notes: Alignment required
Adjustable Alpine short control arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4.5" lift kits Constructed from durable 42mm x 4mm wall DOM tube for maximum strength Bolts to the factory control arm mounting brackets High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality Zero maintenance forged threaded joints for smooth quiet flex Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Premium black e-dipped coating for corrosion resistance Sold in pairs Dimensions: Factory length (inch/cm): 16-3/8” / 42,55 Min. length (inch/cm): 16-1/8” / 40,96 Max. length (inch/cm): 17-3/8” / 44,13 In the box: Rear lower left adjustable control arm Rear lower right adjustable control arm Notes: Alignment required
Balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4" lift kits Constructed from durable 1.75" x 0.25" wall DOM tube for maximum strength Bolts to the factory control arm mounting brackets Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase Full range of movement will not restrict articulation or flex off-road Rebuildable joint for easy maintenance Premium black e-dipped coating on tube provides superior durability and corrosion resistance Dimensions: Factory length (inch/cm): 15 3/4" / 40 cm Min. length (inch/cm): 14 15/16" / 37,94 cm Max. length (inch/cm): 17 5/16" / 43,97 cm Both ends (inch/cm): 14 mm bolt
Designed to prevent damage to suspension and shock absorbers during a hard impact Helps prevent wheel rubbing against the wheel arch Easy to install Sold in pairs
Pad height: 2,75" Designed to prevent damage to suspension and shock absorbers during a hard impact Helps prevent wheel rubbing against the wheel arch Easy to install Sold in pairs
Kit adds 0,5" to rear lower factory bump stops Compatible with lifted JT Gladiator models Improves energy absorption during compression and suspension movement Fine-tune bump pad height for a personalised off-road setup Notes: Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders Fits JT Gladiator (pickup) 1.5"+ Lift Lift Height and Max Tire Size: 1.5" Lift: 0.5" Rear Lower (TX1969100): Sport/Overland Fenders: 33" Rubicon Fenders: 35" 2.5" Lift: 0.5" Rear Lower (TX1969100 x 2): Sport/Overland Fenders: 35" Rubicon Fenders: 35" 3.5" Lift: 1.5" Rear Lower (TX1969100) & 0.5" Rear Lower (TX1969100): Sport/Overland Fenders: 35" Rubicon Fenders: 37" 4.5" Lift: 1.5" Rear Lower (TX1969100) & 0.5" Rear Lower (TX1969100) & 0.5" Rear Upper (TX1969400 x 2): Sport/Overland Fenders: 37" Rubicon Fenders: 38" 6.5" Lift: 1.5" Rear Lower (TX1969100 x 2) & 0.5" Rear Lower (TX1969100 x 2) & 0.5" Rear Upper (TX1969400 x 2): Sport/Overland Fenders: 38" Rubicon Fenders: 40"
Prevent the spring from unloading causing rotation or shifting Durable construction Easy installation Zinc plated Sold in pairs
Proudly made in the USA Made from durable 3/16" plate steel Protection from off-road hazards Compatible with any stock or short arm suspension Also compatible with Rough Country long arm suspensions
Constructed from 1/4” thick steel Includes 2 skid plates Notes: Welding required
OFD OFFROAD FABRICATION
Superior strength to OEM control arms Rear arms are 1/4” longer that stock They install in the OE mounting locations Premium Clevite rubber bushings preinstalled Built from 2” OD x .250-wall DOM tubing Durable gloss black powder coat finish
Superior strength compared to OEM control arms and can be used with OEM upper control arms Increases clearance to the factory axle brackets for improved front suspension droop travel Lengthened over stock in order to properly correct caster on 2-4,5" lifts Made from 2" x 1/4" wall DOM tubing Premium Clevite brand rubber bushings absorb noise and reduce vibrations for a quiet, comfortable ride and maintenance free operation Durable Powder Coat finish provides excellent protection from corrosion and debris Sold in pairs
Superior strength compared to OEM control arms Can be used with OEM upper control arms Made from 2" x 1/4" wall DOM tubing Premium Clevite brand rubber bushings absorb noise and reduce vibrations for a quiet, comfortable ride Durable powder coat finish provides excellent protection from corrosion and debris Compatible with OE attachment points Sold in pairs Notes: Also fit Wrangler JK right hand drive (RHD) models