Filtres
Heavy-duty reinforcement bracket attaches directly to factory track bar mount on axle housing Relocates mounting point to reduce trackbar operating angle and improve handling at high speeds Angled design corrects geometry on lifted vehicles with rotated axle housing or CV-type driveshaft to eliminate binding and premature bushing wear Economical bolt-on solution minimizes risk of track bar failure on the trail Protective powder coat finish resists corrosion
Heavy-duty reinforcement bracket attaches directly to factory track bar mount on axle housing Angled design corrects geometry on lifted vehicles with rotated axle housing or CV-type driveshaft Premium steel construction is laser cut, formed and folded for maximum strength Economical bolt-on solution minimizes risk of track bar failure on the trail Protective powder coat finish resists corrosion Notes: Fits vehicles equipped with CV-type driveshaft ONLY NOT compatible with right hand drive vehicles
Recenter the rear axle under your lifted JK with this relocation bracket Designed for 3-5" lifted Jeeps High strength 3/16" construction Hardware included Easy bolt-on installation
Recenter the rear axle Designed for 4-4,5" lifted Jeeps Hardware included Zinc plated for corrosion resistance Easy installation
Bolt on design CNC laser cut and bent 1/4" steel Clamps around tube for superior strength Fits lift 3-6" Made in USA Notes: Can be used with adjustable track bar 3-6"
Billet aluminum flange 8mm-1.25 x 25mm socket cap screws
Helps prevent against debris and wind entering the vehicle Sheet metal construction for strength and rigidity Hardware included Sold as a pair Notes: Fit rear tubular doors SB77795 ONLY (sold separately)
Anti rattle latch system Black textured powder coat Easy grip custom ball handle Formed doors integrate with vehicle body Fully welded assembly for strength and rigidity Includes new door retention straps Open air off road tubular design Quality OEM hinges and latches In the box: (2) Rear tube door (2) Side mirror
Able to use OE mirrors Interior/exterior accessible handle Billet aluminum handle Enclosed latch housing Limit straps included Impact resistant edge guard/end caps Sold as a pair
Manufactured from quality high tensile bar Finished in a zinc anti-corrosion finish High flexing rubber bushes Adjustable In the box: (1) Rear upper adjustable control arm
Manufactured from quality high tensile bar Coated with corrosion-resistant zinc plating Durable, flexible bushings Adjustable length Provide space for an enlarged fuel tank In the box: Control arm adjustable upper rear straight Control arm adjustable upper rear bent
Adjustable Alpine IR Short Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 2-4” lift kits Alpine IR Short Control Arms are constructed from durable 42mm x 4mm wall DOM tube for maximum strength Bolts to the factory control arm mounting brackets Install and drive simple bolt-on installation – no welding required Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase Full range of movement will not restrict articulation or flex off-road Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping Maintenance-free IR Bushings improve on- and off-road ride quality and performance Zero maintenance forged threaded joints for smooth quiet flex Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Dimensions: Tube diameter & wall = 42mm x 4mm Factory length: 16-3/8” Min length: 16-1/8” / 40,96 cm Max length: 17-3/8” / 44,13 cm Both ends = 16mm bolt In the box: Rear upper left adjustable control arm Rear upper right adjustable control arm Notes: Alignment required
Adjustable arm design utilizing a forged adjustable flex end and jam nut Improved caster and axle positioning on 0-4" lifts using the factory mounting locations Forged end is fully rebuildable and greaseable Includes integrated e-brake mounting tabs 1-1/4"-12 threads provide ultimate strength and fine-tune adjustability Factory style rubber bushings at the non-adjustable ends for quite, maintenance-free operation CNC formed for proper tire, frame and axle mount clearance Sold in pairs
High strength 1.5" x .120" wall DOM construction Adjustable design utilizes a forged flex joint and jam nut Specially formed for proper tire, frame, and axle clearance Axle mount uses OE-style rubber bushing to isolate NVHs Adjustable for use with 0-6" lifts Fully assembled, ready to install right out of the box Sold in pairs
Adjustable arm design utilizing a forged adjustable flex end and jam nut Forged end is fully rebuildable and greaseable 1-1/4"-12 threads provide ultimate strength and fine-tune adjustability Compatible with OE attachment points Factory style rubber bushings at the non-adjustable ends for quite, maintenance-free operation CNC formed for proper tire, frame and axle mount clearance Sold in pairs
Proudly made in the USA Fully greasable Increased longevity Upper joints pivot up to 20 degrees Lower joints pivot up to 35 degrees Allow for greater articulation off-road In the box: Rear upper adjustable control arms Flex joints Nuts and grease fittings
Proudly made in the USA Fully greasable Upper joints pivot up to 20 degrees Lower joints pivot up to 35 degrees Allows for greater articulating off-road Adjustment range from 2" to 6" Fully controllable X-Flex tips ensure a much longer life than the original ones In the box: (2) Rear upper adjustable control arms
Fits Nissan Navara NP300 Manufactured from quality High Tensile Bar Finished in a zinc anti-corrosion finish High flexing rubber bushes The threaded rod is 150mm long giving ample adjustability
Manufactured from quality High Tensile Bar Finished in a zinc anti-corrosion finish The threaded rod giving ample adjustability High flexing rubber bushes Sold as a pair with polyurethane bushes fitted Corrects pinion angle on stock and lifted vehicle High clearance thanks to offset design Not suitable with rear air bag suspension ITS Seal Technology
Professional set, matched to the car Improves handling Adapted to both on-road and off-road conditions Improves the behavior of the car Control arms specs: Solid and durable construction for years High quality bushings provide excellent vibrations protect Anodized aluminum clamp collar Forged threated joints Premium black e-dipped coating for corrosion resistance Fully adjustment and maintenance-free IR bushings specs: Direct replacement for factory-style control arm bushings Inner sleeve provides 360 degrees of rotation for unrestricted movement at full droop Rotating sleeve features an extremely tough, hardened bearing surface Eliminates rotational stress and reduces bushing bind Provides excellent noise, vibrations, and harshness (NVH) damping Improves on- and off-road ride quality and performance Bushings are factory lubricated and permanently sealed Dimensions: Factory length (inch/cm): 17,425'' / 44,26 cm Min length (inch/cm): 17 3/8'' / 44,13 cm Max length (inch/cm): 18 1/2'' / 46,99 cm Both ends: 14 mm bolt In the box: Rear upper left control arm Rear upper right control arm
Solid and durable construction for years High quality bushings provide excellent vibrations protect Anodized aluminum clamp collar Forged threated joints Premium black e-dipped coating for corrosion resistance Fully adjustment and maintenance-free IR bushings specs: Direct replacement for factory-style control arm bushings Inner sleeve provides 360 degrees of rotation for unrestricted movement at full droop Rotating sleeve features an extremely tough, hardened bearing surface Eliminates rotational stress and reduces bushing bind Provides excellent noise, vibrations, and harshness (NVH) damping Improves on- and off-road ride quality and performance Bushings are factory lubricated and permanently sealed Dimensions: Factory length (inch/cm): 17 7/16'' / 44,29 cm Min length (inch/cm): 17 5/8'' / 44,77 cm Max length (inch/cm): 18 7/8'' / 47,94 cm Both ends: 14 mm bolt In the box: Rear upper left control arm Rear upper right control arm Notes: Alignment required
Adjustable Long Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6” lift kits Alpine Long Control Arms are constructed from durable 50mm x 5mm wall DOM tube for maximum strength Install and drive simple bolt-on installation – no welding required Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase Full range of movement will not restrict articulation or flex off-road Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping Maintenance-free IR Bushings improve on- and off-road ride quality and performance Zero maintenance forged threaded joints for smooth quiet flex Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Dimensions: Tube Diameter & Wall = 50 mm x 5 mm Factory Length = 16-3/8” Min. Length = 43-1/2" Max. Length = 44-5/8" In the box: Rear upper left adjustable control arm Rear upper right adjustable control arm Notes: Require brackets TX1968000 (sold separately) Require alignment
Adjustable Long Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6” lift kits Alpine Long Control Arms are constructed from durable 50mm x 5mm wall DOM tube for maximum strength Install and drive simple bolt-on installation – no welding required Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase Full range of movement will not restrict articulation or flex off-road Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping Maintenance-free IR Bushings improve on- and off-road ride quality and performance Zero maintenance forged threaded joints for smooth quiet flex Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Dimensions: Tube Diameter & Wall = 50mm x 5mm Factory Length = 17-3/8” Min. Length = 32-3/4” Max. Length = 33-3/4” In the box: Rear upper left adjustable control arm Rear upper right adjustable control arm Notes: Require cutting/removal of factory control arm bracketry to install Long Arm Brackets Require bracket kit TX1958002 (for Jeep JL 2 door) or TX1958000 (for Jeep JL 4 door) (sold separately) Require alignment
Solid and durable construction for years High quality bushings provide excellent vibrations protect Anodized aluminum clamp collar Forged threated joints Premium black e-dipped coating for corrosion resistance Fully adjustment and maintenance-free Dimensions: Factory length (inch/cm): 16-3/8” Min length (inch/cm): 43-1/2" Max length (inch/cm): 44-5/8" Both ends: 16 mm bolt In the box: Rear upper left control arm Rear upper right control arm Notes: Require brackets TX1968000 (sold separately) Require alignment Require cutting/removal of factory control arm brackets to install Alpine long arm brackets