Filtres
Proudly made in the USA Fully greasable Upper joints pivot up to 20 degrees Lower joints pivot up to 35 degrees Allows for greater articulating off-road Adjustment range from 2" to 6" Fully controllable X-Flex tips ensure a much longer life than the original ones In the box: (2) Front lower adjustable control arms
Proudly made in the USA Fully greasable Lower joints pivot up to 35 degrees Allows for greater articulating off-road Adjustment range from 2,5" to 6" Fully controllable X-Flex tips ensure a much longer life than the original ones In the box: (2) Front lower adjustable control arms
Professional set, matched to the car Improves handling Adapted to both on-road and off-road conditions Improves the behavior of the car Control arms specs: Solid and durable construction for years High quality bushings provide excellent vibrations protect Anodized aluminum clamp collar Forged threated joints Premium black e-dipped coating for corrosion resistance Fully adjustment and maintenance-free IR bushings specs: Direct replacement for factory-style control arm bushings Inner sleeve provides 360 degrees of rotation for unrestricted movement at full droop Rotating sleeve features an extremely tough, hardened bearing surface Eliminates rotational stress and reduces bushing bind Provides excellent noise, vibrations, and harshness (NVH) damping Improves on- and off-road ride quality and performance Bushings are factory lubricated and permanently sealed Dimensions: Factory length (inch/cm): 24" / 60,96 cm Min length (inch/cm): 24'' / 60,96 cm Max length (inch/cm): 25,25'' / 64,13 cm Both ends: 16 mm bolt In the box: Front lower left control arm Front lower right control arm
Adjustable Long Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6” lift kits Alpine Long Control Arms are constructed from durable 50mm x 5mm wall DOM tube for maximum strength Install and drive simple bolt-on installation – no welding required Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase Full range of movement will not restrict articulation or flex off-road Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping Maintenance-free IR Bushings improve on- and off-road ride quality and performance Zero maintenance forged threaded joints for smooth quiet flex Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Dimensions: Tube Diameter & Wall = 50 mm x 5 mm Factory Length = 24" Min. Length = 30-7/8" Max. Length = 32" In the box: Front lower left adjustable control arm Front lower right adjustable control arm Notes: Require brackets (sold separately): Jeep JL 2 door TX1958002 Jeep JL 4 door TX1958000 Jeep JT TX1968000 Require alignment
Balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6" lift kits Constructed from durable 50mm x 5mm wall DOM tube for maximum strength High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality Zero maintenance forged threaded joints for smooth quiet flex Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Premium black e-dipped coating for corrosion resistance Dimensions: Factory length: 24" / 60,96 cm Min length: 33 3/4'' / 85,72 cm Max length: 35 1/4'' / 84,45 cm Both ends: 14 mm bolt In the box: Front lower left control arm Front lower right control arm Notes: Alignment required Require Alpine long arm bracket kit (TX1958002 for Jeep JL 2 Door, TX1958000 for Jeep JL 4 Door, TX1968000 for Jeep JT) (sold separately)
Balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6" lift kits Constructed from durable 50mm x 5mm wall DOM tube for maximum strength High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality Zero maintenance forged threaded joints for smooth quiet flex Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Premium black e-dipped coating for corrosion resistance In the box: Front lower left control arm Front lower right control arm Notes: Requires cutting and welding Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets Must be used w/ Alpine Long Arm Bracket Kit TX1957000 (sold separately)
(2) Front lower adjustable control arm Bolt in design Dual durometer, self-centering Giiro joints to isolate road noise & vibration Maintenance free Giiro joints Precision bent front lower for tyre clearance Dimensions: Center to Center STOCK = 24.000" Center to Center MIN = 23.9375" Center to Center MAX = 24.880"
(2) Adjustable front lower control arm Maintenance free, dual durometer, self-centering Giiro Joints Giiro joints to isolate road noise and vibration Bolt in design Made in the USA Precision bent front lower for tyre clearance Dimensions: Center to Center STOCK = 22,625" Center to Center MIN = 22,480" Center to Center MAX = 24,175"
(2) Front lower adjustable control arm Bolt in design Johnny Joints to provide superior flex Custom 5" long upper adjuster for maximum front caster angle adjustment Giiro Joint to isolate road noise & vibration Lower bent for tyre clearance Dimensions: Center to Center STOCK = 24.000" Center to Center MIN = 23.9375" Center to Center MAX = 24.880"
Adjustable Alpine short control arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 2-4" lift kits Constructed from durable 42mm x 4mm wall DOM tube for maximum strength Bolts to the factory control arm mounting brackets High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality Zero maintenance forged threaded joints for smooth quiet flex Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Premium black e-dipped coating for corrosion resistance Sold in pairs Dimensions: Factory length (inch/cm): 22-5/8'' / 57,5 cm Min. length (inch/cm): 22-3/4'' / 57,7 cm Max. length (inch/cm): 24'' / 61 cm In the box: Front lower left control arm Front lower right control arm Notes: Alignment required
Adjustable Alpine short control arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4,5" lift kits Constructed from durable 42mm x 4mm wall DOM tube for maximum strength Bolts to the factory control arm mounting brackets High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality Zero maintenance forged threaded joints for smooth quiet flex Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment Premium black e-dipped coating for corrosion resistance Sold in pairs Dimensions: Factory length (inch/cm): 24" / 60,96 cm Min length (inch/cm): 24'' / 60,96 cm Max length (inch/cm): 25,25'' / 64,13 cm Both ends: 16 mm bolt In the box: Front lower left control arm Front lower right control arm
Balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4" lift kits Constructed from durable 1.75" x 0.25" wall DOM tube for maximum strength Bolts to the factory control arm mounting brackets Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase Full range of movement will not restrict articulation or flex off-road Rebuildable joint for easy maintenance Premium black e-dipped coating on tube provides superior durability and corrosion resistance Dimensions: Factory length (inch/cm): 15 3/4" / 40 cm Min. length (inch/cm): 14 15/16" / 37,94 cm Max. length (inch/cm): 17 5/16" / 43,97 cm Both ends (inch/cm): 14 mm bolt
Designed to prevent damage to suspension and shock absorbers during a hard impact Helps prevent wheel rubbing against the wheel arch Easy to install Sold in pairs
Constructed from 1/4” thick steel Includes 2 skid plates Notes: Welding required
CNC cut and bent Weld on skid 1/4" thick Protect control arms Add strength to the lower brackets Made in the USA Notes: Welding required
Made of durable stainless steel Reduces vibrations Correct geometry setting In the box: (4) 1/4" thick washer (axle mount) (4) 1/8" thick washer (frame mount)
Improves car's handling precision Improves driving comfort and safety Absorb vibrations Resistant to environmental factors In the box: Front lower control arms bushings (4) Polyurethane bushing (4) Inner sleeve Notes: Proper installation requires the use of generous amounts of silicone-based grease with a PTFE additive. We do not recommend using any lithium or molly-based grease as they tend to dry out the polyurethane resulting in cracks and premature wear
Superior strength compared to OEM control arms Formed to match the factory front arm profile, creating plenty of clearance for over-sized tires Increase and correct caster on vehicles lifted up to 4,5" Made from 2" x 1/4" wall DOM tubing Premium Clevite brand rubber bushings absorb noise and reduce vibrations for a quiet, comfortable ride Durable Powder Coat finish provides excellent protection from corrosion and debris Notes: Also fit Wrangler JK right hand drive (RHD) models
Superior strength to OEM control arms Rear arms are 5/16” longer that stock They install in the OE mounting locations Premium Clevite rubber bushings preinstalled Built from 2” OD x .250-wall DOM tubing Durable gloss black powder coat finish
Superior strength compared to OEM control arms and can be used with OEM upper control arms Increases clearance to the factory axle brackets for improved front suspension droop travel Lengthened over stock in order to properly correct caster on 2-4,5" lifts Made from 2" x 1/4" wall DOM tubing Premium Clevite brand rubber bushings absorb noise and reduce vibrations for a quiet, comfortable ride and maintenance free operation Durable Powder Coat finish provides excellent protection from corrosion and debris Sold in pairs Notes: On Grand Cherokee WJ models, it is necessary to use JKS1609 washers
Allows for greater articulation off-road Tubular construction Includes Clevite brand OEM style rubber bushings
Allows for greater articulation off-road Tubular construction Includes Clevite brand OEM style rubber bushings
Proudly made in the USA Made from durable 3/16" plate steel Protect control arms from off-road hazards Compatible with stock or aftermarket control arms Compatible with Rough Country long arms In the box: (2) Front control arm skid plates Notes: Welding required
Balance caster and pinion angles for proper suspension alignment on 1,5-3,5" lift kits Constructed from durable 42mm x 4mm wall DOM tube for maximum strength Re-centers axles in the wheel well for proper suspension movement Bolts to the factory control arm mounting brackets Full range of movement will not restrict articulation or flex off-road High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality. Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance Install and drive simple bolt-on installation – no welding required Dimensions: Factory length: 24” Sport control arm length: 24-5/8” Both ends: 16 mm bolt