Filtres
Kit suspension IRONMAN 4X4 Response JEEP030BKG
Kit suspension IRONMAN 4X4 Response JEEP030CKG
Proudly made in the USA Incredible on and off-road ride quality No welding required True 4-link setup with new, longer travel arms Prevents binding and rear-steer,Front adjustable track bar is made of forged solid steel for unsurpassed strength and durability Dual Rate Coils Provide Great handling and smooth ride quality Increased Ground Clearance Gain unparalelled axle flex while keeping pinion angles optimized In the box: Front lifted dual-rate coil springs Front upper adjustable control arms long arm with flex joints Front lower adjustable control arms long arm with flex joints Front frame strenghening brackets Front sway-bar quick disconnects Front forged adjustable track bar Front driveshaft Rear lifted dual-rate coil springs Rear upper adjustable control arms long arm with flex joints Rear lower adjustable control arms long arm with flex joints Rear track bar drop bracket Hardware (4) Premium N3 shocks Notes: Does not fit 2 door models Not suitable for diesel models Does not fit Rubicon models Does not fit Jeep Wrangler JL 392 models
Kit suspension PEDDERS TrakRyder Foam Cell HD (Heavy Duty) • JEEP Wrangler JLU 2018+ • Rehausse : +50mm
Kit suspension PEDDERS TrakRyder Foam Cell MD (Medium Duty) • JEEP Wrangler JL SWB 2018+ • Rehausse : +50mm
Kit suspension PEDDERS TrakRyder Foam Cell MD (Medium Duty) • JEEP Wrangler JLU 2018+ • Rehausse : +50mm
Proudly made in the USA Easy bolt-on installation Increased ground clearance Clears up to 35" tyres In the box: Front and rear coil spring Front and rear sway bar links Front and rear bump stops (4) Shocks Premium N3 Series Hardware Notes: Fits 4WD models ONLY 35" tires will clear but rubbing may occur with extreme articulation If planning on running 35" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links
Proudly made in the USA Easy bolt-on installation Increased ground clearance Clears up to 35" tyres In the box: Front and rear coil spring spacers Front and rear shock relocation brackets Front and rear sway bar links Front and rear bump stops Hardware Notes: Fits 4WD models ONLY 35" tires will clear but rubbing may occur with extreme articulation If planning on running 35" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links For Jeep JL 4XE may require replacement of the front drive shaft Does NOT fit Mojave models Does NOT fit 392 models
Proudly made in the USA Easy bolt-on installation Increased ground clearance Clears up to 35" tyres In the box: Front and rear coil spring Front and rear sway bar links Front and rear bump stops (2) Shocks Premium N3 Series Hardware Notes: Fits 4 doors models ONLY Does NOT fit Rubicon models Does NOT fit diesel models Does NOT fit 392 models 35" tires will clear but rubbing may occur with extreme articulation If planning on running 35" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links
Easy bolt-on installation. Increased ground clearance. Clears up to 35" tyres In the box: (2) Front Premium N3 Series shock Front coil spring spacers Front shock relocation brackets Front sway bar links Front bump stops Rear coil springs Rear sway bar links Rear bump stops (2) Rear Premium N3 Series shock Hardware Notes: Does NOT fit Mojave models Does NOT fit 392 models 35" tyres will clear but rubbing may occur with extreme articulation If planning on running 35" tyres on factory wheels, double check clearance between the front tyre, lower control arm and sway-bar links
Proudly made in the USA Easy Installation Increased ground clearance Levels the front with the rear of the vehicle Coil springs are based on OEM spring rates for great handling and smooth ride quality Includes forged track bar and rear track bar bracket to keep the axles perfectly centered Rear N3 shock specs: Performance proven 10-Stage variable valving 35mm Piston Chromed hardened 18mm piston rod 200 psi Nitrogen charged Rubber bushings for long life Metallic silver paint Fluid rated to -40°C Tensile strength up to 36kN In the box: (2) Front shock Premium N3 (2) Front lifted coil spring Front adjustable track bar Front lower control arm drop brackets Front sway bar link Front bump stops (2) Rear lifted coil spring Rear sway bar links Rear track bar bracket Rear bump stops (2) Rear shock Premium N3 Notes: Fits 4WD models ONLY An aftermarket driveshaft is highly recommended for installation of any Jeep JL lift kit 3,5" or taller. The factory driveshaft will become damaged if the suspension reaches full droop or flex. Please use Rough Country’s Jeep JL Front CV Driveshaft RC5090.1
Proudly made in the USA Easy bolt-on installation Increased ground clearance Clears up to 35" tyres In the box: Front and rear coil spring Front and rear sway bar links Front and rear bump stops (2) Shocks Premium N3 Series Hardware Notes: Fits 4WD models ONLY Fit Rubicon models ONLY Does NOT fit diesel models Does NOT fit 392 models 35" tires will clear but rubbing may occur with extreme articulation If planning on running 35" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links
Proudly made in the USA Easy bolt-on installation Increased ground clearance Great handling and smooth ride quality Clears up to 35" tyres In the box: Front adjustable track bar CV Dana 30 front driveshaft Front adjustable lower control arms Front side control arm drop brackets Rear Track Bar Bracket Front and rear coil spring Front and rear sway bar links Front and rear bump stops (4) Shocks Premium N3 Series Rough Country Hardware Notes: Fits 4WD models ONLY Fits Rubicon models ONLY Does NOT fit diesel models Minor drilling required
Very easy to install Increases the ground clearance Allows the installation of larger tyres Gives an aggressive look Shock specs: Advanced foam-cell technology Vehicle specific multi-stage valving Increased fluid capacity for max heat dissipation 180° directional mounting Construction ensures solid contact between tire and road Twin tube construction Chrome plated shaft Sintered iron piston Black boot included In the box: Front shock absorbers Front progressive springs Front extended stabilizer links Front extended buffers Rear shock absorbers Rear progressive springs Rear stabilizer extension links Rear extended bump stops Notes: Does NOT fit Rubicon version Fits models with a diesel engines ONLY
It has elements allowing proper installation and operation of coil-over shocks Improves driving comfort Allows the installation of larger tires Increases ground clearance Easy to install Shock specs: Body: Smooth bore and honed seamless steel Body Plating: Zinc plated for a long-lasting finish Components: Black anodized, CNC machined 6061-T6 billet aluminum Piston: 7075 hard-anodized high-flow aluminum piston Valving: Tunable, velocity sensitive deburred valve shims Hose: Reusable ORB O-ring port hose fittings for superior seal with remote reservoirs Dual Speed Compression: You can adjust the shock's high and low-speed compression damping by simply turning the external adjusters. Seals: High-temp Viton redundant sealing pack system with main seal, wiper seal and scraper seal Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures Shafts: Hard chrome plated stainless steel, hard chrome plated Bearing: Spherical, PFTE-lined, heat-treated alloy steel In the box: (2) Front FOX 2.0 Series Coil-Over Reservoir shocks Front track bar (2) Rear FOX 2.0 Series Coil-Over Reservoir shocks Rear track bar relocation bracket Front and rear lower control arms Front and rear mounting shock adapters Front and rear bump stop spacers Front and rear quick disconnect sway bar end links Front and rear extended stainless brake lines Notes: 2 Door models: rear aftermarket driveshaft is required (sold separately) 4 Door models: rear aftermarket driveshaft is recommended (sold separately) Aftermarket wheels with back spacing of 4,5" or less are required 2.0L and Diesel models may require additional modification
Lift height 2,5" Longer spacers in the front corrects the factory nose-down rake Max tyre diameter: Sport | Sahara: 35” In the box: Front 3” spring spacers (4) Front 0,5” bump stop strike pad shims (2) Longer front sway bar links 11,5” Rear 2,5” spring spacers (2) Rear 0,5” bump stop strike pad shims (2) Longer rear sway bar links 10,75” Front & rear 2" bump stop strike pad kit (TX1959500) Front & rear 2-2,5” shock extension brackets All necessary hardware Notes: Does NOT fit Rubicon models Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres For Jeep JL 4XE may require replacement of the front drive shaft
Lift height: 2,5” Increases ground clearance Max tyre diameter: Sport | Sahara (w/ 3” front & 2.5” rear bump stops): 35” In the box: Front 3” lift spring spacers (4) Front 0,5” bump stop strike pad shims (2) Longer front sway bar links 11,5” Rear 2,5” lift spring spacers (2) Rear 0,5” bump stop strike pad shims (2) Longer rear sway bar links 10,75” Front & rear 2" bump stop strike pad kit (TX1959500) All necessary hardware Notes: Does NOT fit Rubicon models Taller spacers in the front corrects the factory nose-down rake Sport & Sahara models require aftermarket wheels w/ 4.5” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Sport/Sahara models require the INCLUDED 0,5” front & 0,5” rear bump stop strike pad shims in order to fit 35” tyres Requires Shock Extensions (TX1985200) or longer shocks (sold separately) JL/JLU: Front Lower Sport Flexarms (TX1253000) or Front Control Arm Sport Brackets (TX1938125) recommended to optimize caster and pinion angles (sold separately) For Jeep JL 4XE may require replacement of the front drive shaft
Lift Height: 2,5” Easy installation Increased ground clearance Max Tire Diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front 2,5” lift coil springs (2) Front longer sway bar links 11,5” Rear 2,5” lift coil springs (2) Rear longer sway bar links 10,75” Front & Rear 2” bump stop strike pad kit (TX1959500) Front & Rear 0,5” bump stop strike pad shim kit (TX1959300) All necessary hardware Notes: Sport & Sahara models requires aftermarket wheels with 4,5” backspacing or less – or Offset Wheel Adapters for stock wheels May require HD Adjustable Rear Track Bar Bracket (TX1953600) to prevent contact between drive shaft & gas tank Requires Shock Extensions (TX1985200) or longer shocks, we recommend FOX Shock absorbers for superior performance Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tire Sport Front Lower Flexarms (TX1253000) recommended to optimize caster and pinion angles
Lift Height 2,5" Levels the vehicle Max Tire Diameter:Sport/Sahara Fenders: 35” (w/ 3” front & 2.5” rear bump stops) Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops) Rubicon Fenders: 37” (w/ 2.5” front & 3” rear bump stops) In the box: Front coil springs (2) Front sway bar links Rear coil springs (2) Rear sway bar links Bump stop extensions Hardware All necessary hardware Notes: Caster correction recommended, but not required (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Requires longer shocks (sold separately) – we recommend Falcon Performance SP2 Mode Adjust Shocks or TeraFlex 9550 VSS Twin-Tube Shocks Requires alignment May require 2” Bump Stop Strike Pad Extension Kit (included) and/or 0.5” Bump Stop Strike Pad Shim Kit TX1959300 (sold separately)
Lift Height: 2,5” Increased ground clearance Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front Sway Bar Link Kit 10,75" Front & Rear Bump Stop Strike Pad Extension Kit 2" Rear Sway Bar Link Kit w/ Swivel Stud 11,5" Lift Coil Spring Kits 2,5" 9550 VSS Twin-Tube Shock Kit (2.5-3” Lift) All necessary hardware Notes: Sport & Sahara models require aftermarket wheels with 4,5” backspacing or less – or Offset Wheel Adapters for stock wheels Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tire
Increased ground clearance Easy installation Gives aggressive look Max Tire Diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” Includes: Front Coil Spring Kits Lift 3.5” Front Track Bar Axle Bracket (2.5-3.5” Lift) Front Bump Stop Strike Pad Extension Kit 2” Front Bump Stop Strike Pad Shim Kit 0.5” Front Sway Bar Link Kit 10.75” Rear Coil Spring Kits Lift 3.5” Rear Track Bar Axle Bracket (2.5-4.5” Lift) Rear Bump Stop Strike Pad Extension Kit 2” Rear Bump Stop Strike Pad Shim Kit 0.5” Rear Sway Bar Link Kit w/ Swivel Stud 11.5” All necessary hardware Notes: Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires. Caster correction required: Front Lower Sport Flexarm Kit (TX1253000) or Front Control Arm Sport Brackets (TX1938125) or adjustable 8-Arm Alpine [IR] Short Control Arm Kit (Alpine: TX1416610 | Alpine IR: TX1416510) and/or adjustable Alpine IR Front Track Bar (TX1753420) recommended Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately)
Allows installation of larger tyres Improves off-road handling characteristics Increases ground clearance Easy to install In the box: (2) Front springs 3,5" lift (2) Rear springs 3,5" lift (2) Bumpstop front (4) Bumpstop spacers front (2) Bumpstop rear (2) Bumpstop bracket rear (2) Bumpstop mounting strap rear (4) Bumpstop spacers rear (2) Swaybar link front (2) Swaybar link rear Panhard rod bracket front Panhard rod bracket rear Mounting kit Notes: Caster correction required – NOT INCLUDED. Recommended components: Front Lower Sport Control Arm Kit TX1253000 (sold separately), or Front Control Arm Sport Frame Bracket Kit TX1938125 (sold separately), or adjustable 8-Arm Short Control Arm Kit (Alpine TX1416610 (sold separately) or Alpine IR TX1416510 (sold separately), or adjustable 8-Arm Long Control Arm Bracket Kit Alpine TX1316010 (sold separately) or Alpine IR TX1310510 (sold separately), and/or adjustable Alpine IR Front Track Bar TX1753420 (sold separately). Requires wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 (sold separately) Models w/ plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” tyres Requires 2”-Stroke SpeedBump Progressive Bump Stop Kit TX1958352 (sold separately) Requires 2” Bump Stop Strike Pad Extension Kit TX1959500 (sold separately) and/or 0.5” Bump Stop Strike Pad Shim Kit TX1959300 (sold separately) Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets Alignment required Requires longer shocks
Lift height: 3,5” Easy installation Increased ground clearance Max Tire Diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front coil spring Lift 3,5” Front track bar axle bracket Front bump stop strike pad extension kit Front bump stop strike pad shim kit Front sway bar link kit Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop strike pad extension kit Rear track bar axle bracket Rear coil spring lift 3,5” Notes: Requires aftermarket wheels with 4,75” backspacing or less – or Offset Wheel Adapters for stock wheels Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyre May require 2” Bump Stop Strike Pad Extension Kit TX1959500 and/or 0,5” Bump Stop Strike Pad Shim Kit TX1959300 (sold separately) Requires longer Front Lower Sport Control Arms or Front Control Arm Sport Brackets or adjustable short or long Alpine (IR) Control Arms and Front and/or Rear HD Forged Adjustable Track Bar(s) to correct suspension geometry (sold separately) Requires longer shocks (sold separately)
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion In the box: (2) Front coil spring Lift 2,5" Short control arm kit Alpine Front forged adjustable track bar Front track bar axle bracket Front progressive bump stop kit Front bump stop extension kit Front bump stop strike pad shim kit Front sway bar quick disconnect kit Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop extension kit Rear progressive bump stop kit Rear track bar axle bracket (2) Rear coil spring Lift 2,5" All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2,5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion In the box: (2) Front coil spring Lift 2,5" (2) Front lower adjustable control arm Alpine (2) Front upper adjustable control arm Alpine Front forged adjustable track bar Front progressive bump stop kit Front bump stop extension kit Front bump stop strike pad shim kit Front sway bar quick disconnect kit Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop extension kit Rear progressive bump stop kit Rear track bar axle bracket (2) Rear lower adjustable control arm Alpine (2) Rear upper adjustable control arm Alpine (2) Rear coil spring Lift 2,5" All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2,5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required Requires longer shocks – Falcon Performance Shocks recommended (sold separately)
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion In the box: (2) Front coil spring Lift 3,5" Short control arm kit Alpine Front forged adjustable track bar Front track bar axle bracket Front progressive bump stop kit Front bump stop extension kit Front bump stop strike pad shim kit Front sway bar quick disconnect kit Front brake line anchor kit Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop extension kit Rear progressive bump stop kit Rear track bar axle bracket (2) Rear coil spring Lift 3,5" All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Simple bolt-on installation In the box: (2) Front coil spring Front track bar bracket (2) Front brake line anchors (2) Front longer sway bar links Front adjustable track bar Alpine (2) Front quick disconnect sway bar (2) Front lower adjustable control arm (2) Front upper adjustable control arm (2) Rear lower adjustable control arm (2) Rear upper adjustable control arm (2) Rear longer sway bar link Progressive bump stop kit TeraFlex Falcon (2) Rear coil spring Front and rear bump stop strike pad kit 2" Front and rear bump stop strike pad shim kit 0,5" All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required Requires longer shocks. We recommend Falcon shocks (sold separately)
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Max tyre diameter: Sport/Sahara Fenders: 35" (w/ 3" front & 2.5" rear bump stops) Sport/Sahara Fenders: 37" (w/ 3.5" front & 4" rear bump stops) Rubicon Fenders: 37" (w/ 2.5" front & 3" rear bump stops) In the box: (2) Front lower long control arm Alpine (2) Front upper long control arm Alpine Front forged adjustable track bar assembly w/ joint kit Front quick disconnect w/ swivel stud kit (2) Front coil spring Front track bar bracket (2) Front brake line anchor (2) Rear lower long control arm Alpine (2) Rear upper long control arm Alpine (2) Rear coil spring Rear track bar bracket Rear extended sway bar links Front & rear 2" bump stop strike pad kit Front & rear 0,5" bump stop strike pad shim kit Progressive bump stop kit Long arm bracket kit All necessary hardware Notes: The kit does NOT include shock absorbers, we recommend using TeraFlex or Fox
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Full range of movement for off-road flex and articulation In the box: Front adjustable track bar Alpine (2) Front coil spring Front track bar bracket (2) Front brake line anchors Bracket kit for Alpine long arm (2) Front quick disconnect sway bar kit (2) Front upper adjustable long control arms Alpine (2) Front lower adjustable long control arms Alpine (2) Rear upper adjustable long control arms Alpine (2) Rear lower adjustable long control arms Alpine (2) Rear coil spring Rear track bar bracket (2) Rear extended sway bar link Front & rear 2" bump stop strike pad kit Front & rear 0,5" bump stop strike pad shim kit Progressive bump stop kit Falcon Hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Sport/Sahara Fenders require 3” front and 2.5” rear bump stop extensions and shims (included) in order to fit 35” tyres Sport/Sahara Fenders require 3.5” front and 4” rear bump stop extensions and shims (included) in order to fit 37” tyres Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims (included) in order to fit 37” tyres Alignment required Requires longer shocks, Falcon Performance Shocks recommended (sold separately) Aftermarket High Fenders required to fit 39”+ tires. Bump Stop Extension and Shim requirements will vary based on setup. Installer must check for clearances May require an additional 0.5” Bump Stop Strike Pad Shim Kit TX1959300 (sold separately) Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets
Dependable performance w/ zero worries Positive, responsive handling w/ reduced NVH High-quality, maintenance-free factory-style bushings provide excellent vibration damping and ride quality Full range of movement for off-road flex and articulation Install and drive simple bolt-on installation – no welding required Control arms include IR bushings In the box: Front coil spring Lift 2,5" Alpine IR Short control arm kit Front sway bar quick disconnect kit Front HD forged adjustable track bar Rear HD forged adjustable track bar Rear track bar axle bracket Front SpeedBump & Progressive bump stop kit Rear SpeedBump & Progressive bump stop kit Front bump stop strike pad extension kit Rear bump stop strike pad extension kit Front bump stop strike pad shim kit Rear bump stop strike pad shim kit Rear coil spring Lift 2,5" Rear sway bar link kit w/ Swivel Stud All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required
Dependable performance w/ zero worries Increased suspension articulation along with superior ride quality and performance regardless of terrain High-quality, maintenance-free IR Bushings allow unrestricted rotation during droop for less overall bind during articulation as well as improved ride quality Install and drive simple bolt-on installation - no welding required Unprecedented smooth and quiet ride both on- and off-road thanks to the control arms and bushings Control arms include IR bushings In the box: Front coil springs Front adjustable IR track bar Front sway bar links Front brak line anchor kit Rear track bar Rear coil springs Rear track bar bracket Rear sway bar links Alpine IR Control Arm Kit (8-Arm Adjustable) SpeedBump & Progressive Bump Stop Kit Hardware Notes: Requires aftermarket wheels w/ 4.75" backspacing or less Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35" or larger tyres Sport/Sahara Fenders require 3" front and 2.5" rear bump stop extensions and shims (included) in order to fit 35" tyres Rubicon Fenders require 2" front and 2" rear bump stop extensions (included) in order to fit 35" tyres Rubicon Fenders require 2.5" front and 3" rear bump stop extensions and shims (included) in order to fit 37" tyres Alignment required Requires longer shocks, Falcon SP2 Mode Adjust Performance Shocks recommended (sold separately)
Lift height: 3,5" Excellent performance on the trail as well as on the road Increases ground clearance Easy to install Control arms include IR bushings Max tyre diameter: Sport/Sahara Fenders: 35" (w/ 3" front & 2.5" rear bump stops) Rubicon Fenders: 35" (w/ 2" front & 2" rear bump stops) Rubicon Fenders: 37" (w/ 2.5" front & 3" rear bump stops) In the box: (2) Front coils spring Front adjustable track bar Alpine (2) Front quick disconnect sway bar kit (2) Front upper adjustable control arm Alpine IR (2) Front lower adjustable control arm Alpine IR (2) Rear upper adjustable control arm Alpine IR (2) Rear lower adjustable control arm Alpine IR Rear track bar HD adjustable (2) Rear extended sway bar link (2) Rear coil spring Rear track bar bracket Bump stop kit TeraFlex SpeedBump/Falcon All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Requires alignment Requires longer shocks. We recommend Falcon shocks (sold separately)
Lift height: 3,5" Excellent performance on the trail as well as on the road Increases ground clearance Control arms include IR bushings Max tyre diameter: Sport/Sahara Fenders: 35" (w/ 3" front & 2.5" rear bump stops) Rubicon Fenders: 35" (w/ 2" front & 2" rear bump stops) Rubicon Fenders: 37" (w/ 2.5" front & 3" rear bump stops) In the box: (2) Front coils spring Front adjustable track bar Alpine (2) Front quick disconnect sway bar kit (2) Front upper adjustable control arm Alpine IR (2) Front lower adjustable control arm Alpine IR (2) Rear upper adjustable control arm Alpine IR (2) Rear lower adjustable control arm Alpine IR Rear track bar HD adjustable (2) Rear extended sway bar link (2) Rear coil spring Rear track bar bracket Bump stop kit TeraFlex SpeedBump/Falcon All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Requires alignment Requires longer shocks. We recommend Falcon shocks (sold separately)
Lift Height:4,5” Dependable performance w/ zero worries Positive, responsive handling Full range of movement for off-road Install and drive All factory stability controls remain functional In the box: Front Track Bar Axle Bracket (TX1953500) Front Sway Bar Link Kit Rear Track Bar Axle Bracket (TX1953600) Rear Sway Bar Link Kit w/ Swivel Stud Front & rear 4.5” Lift Coil Spring Kits Front & rear 2” Bump Stop Strike Pad Extension Kit Front & rear 0,5” Bump Stop Strike Pad Shim Kit All necessary hardware Max Tyre Diameter: Sport/Sahara : 35” (w/ 3” front & 2.5” rear bump stops) Sport/Sahara : 37” (w/ 3.5” front & 4” rear bump stops) Rubicon : 37” (w/ 2.5” front & 3” rear bump stops) Notes: Caster correction required Sport & Sahara models require aftermarket wheels w/ 4.5” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Sport/Sahara models require the INCLUDED 0.5” front & 0.5” rear bump stop strike pad shims in order to fit 35” tyres Sport/Sahara models require an additional 0.5” Front & Rear Bump Stop Strike Pad Shim Kit TX1959300 (sold separately) in order to fit 37” tyres Rubicon models require the INCLUDED 0.5” front & 0.5” rear bump stop strike pad shims in order to fit 37” tyres JL/JLU: Front Control Arm Sport Brackets (# 1938125) recommended to correct caster angles and restore factory geometry Requires longer shocks (sold separately)
Lift Height: 2,5” Increase ground clearance Levels the front with the rear of the vehicle Positive, responsive handling Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: (2) Front sway bar links 11,5” (2) Rear sway bar links 10,75” Front and rear 2" bump stop strike pad kit Front and rear 0,5" bump stop strike pad shim kit 2,5” lift coil springs (4) 9550 VSS shocks Hardware Notes: Sport & Sahara models require aftermarket wheels with 4,5” backspacing or less – or Offset Wheel Adapters for stock wheels Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tire
Lift height: 2,5” Install & drive simple bolt-on installation – no welding required Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH) Preset front lower Sport flexarms optimize correct caster & pinion angles for 2.5-3.5” lift kits Falcon Progressive bump stops provide progressive compression during high-speed suspension movement Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35" Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front coil spring Lift 2,5" Front lower sport control arm kit Front progressive bump stop Front bump stop strike pad extension kit Front bump stop strike pad shim kit Front sway bar quick disconnect kit RHD Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop strike pad extension kit Rear progressive bump stop Rear track bar axle bracket RHD Rear coil spring Lift 2,5" All necessary hardware Notes: Fits right-hand drive models ONLY Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyre Alignment required Does NOT include shocks, we recommend FOX Shock absorbers for superior performance (sold separately) NOT recommended for vehicles with heavy load. If you have any doubts, please contact our sales department NOT recommended for Diesel models For Diesel models spacer load level kit TX1155100 is required (sold separately)
Lift height: 2,5” Increases ground clearance Max tyre diameter: Rubicon (w/ 2” front & 2” rear bump stops): 35” Rubicon (w/ 2.5” front & 3” rear bump stops): 37” In the box: Front 3” lift spring spacers (2) Longer front sway bar links 11,5” Rear 2,5” lift spring spacers (2) Longer rear sway bar links 10,75" Front & rear 2" bump stop strike pad kit (TX1959500) All necessary hardware Notes: Fits Rubicon models ONLY Taller spacers in the front corrects the factory nose-down rake Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Rubicon models require JL/JLU Bump Stop Strike Pad Shim Kit TX1959300 in order to fit 37” tyres (sold separately) Requires Shock Extensions TX1985200 or longer shocks (sold separately) JL/JLU: Front Lower Sport Flexarms TX1253000 or Front Control Arm Sport Brackets TX1938125 recommended to optimize caster and pinion angles (sold separately) For Jeep JL 4XE may require replacement of the front drive shaft
Lift height: 1,5" Allows fitment of larger tyres for more ground clearance and more aggressive aesthetics Corrects the factory nose-down rake Minimal impact on suspension geometry Delivers true street & trail (ST) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced NVH Falcon progressive front & rear bump stops protect occupants and the vehicle from hard suspension bottoming Full range of movement for off-road flex and articulation Install and drive, simple bolt-on installation – no welding required Max tyre diameter: Sport/Sahara Fenders: 33” Rubicon Fenders: 33” Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops) In the box: 1,5" Lift coil spring spacers Front & rear Falcon progressive bump stop kit (TX1959200) All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Rubicon Fenders require 2” front & 2” rear bump stop extensions in order to fit 35” tyres Requires 2” Front & Rear Bump Stop Strike Pad Extension Kit TX1959500 (sold separately) Works with original or stock-length aftermarket shock absorbers (sold separately) Alignment required
Lift height: 1,5" Allows fitment of larger tyres for more ground clearance and more aggressive aesthetics Corrects the factory nose-down rake Minimal impact on suspension geometry Delivers true street & trail (ST) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced NVH Falcon progressive front & rear bump stops protect occupants and the vehicle from hard suspension bottoming Full range of movement for off-road flex and articulation Install and drive, simple bolt-on installation – no welding required Max tyre diameter: Sport/Sahara Fenders: 33” Rubicon Fenders: 33” Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops) In the box: 1,5” Lift coil spring spacers Front and rear Falcon progressive bump stops Hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Rubicon Fenders require 2” front & 2” rear bump stop extensions in order to fit 35” tyres Requires 2” Front & Rear Bump Stop Strike Pad Extension Kit TX1959500 (sold separately) Works with original or stock-length aftermarket shock absorbers (sold separately) Alignment required
Lift height: 2,5” Install & drive simple bolt-on installation – no welding required Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH) Preset front lower Sport flexarms optimize correct caster & pinion angles for 2,5” lift kits Falcon Progressive bump stops provide progressive compression during high-speed suspension movement Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front 2,5” lift coil springs Front lower Sport Flexarm Kit (2) Front longer sway bar links 11,5” Rear 2,5” lift coil springs (2) Rear longer sway bar links 10,75” Rear Track Bar Bracket (TX1953600) (4) Front & Rear Falcon Progressive Bump Stops (TX1959200) Front & Rear 2” bump stop strike pad kit (TX1959500) Front & Rear 0,5” bump stop strike pad shim kit (TX1959300) All necessary hardware Notes: Requires aftermarket wheels with 4,75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyre Does NOT include shocks. We recommend FOX Shock absorbers for superior performance
Lift height: 2,5” Install & drive simple bolt-on installation – no welding required Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH) Preset front lower Sport flexarms optimize correct caster & pinion angles for 2.5-3.5” lift kits Falcon Progressive bump stops provide progressive compression during high-speed suspension movement Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35" Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front lower Sport Flexarm kit Front sway bar quick disconnect kit Rear track bar axle bracket Rear 11,5" Sway Bar Link Kit w/ Swivel Stud Front & rear bump stop strike pad kit (TX1959500) Front & rear 0,5" bump stop strike pad shim kit (TX1959300) (4) Falcon Progressive Bump Stops (TX1959200) 2,5” lift coil springs All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyre Does NOT include shocks, we recommend FOX Shock absorbers for superior performance (sold separately) NOT recommended for vehicles with heavy load. If you have any doubts, please contact our sales department NOT recommended for Diesel models For Diesel models spacer load level kit TX1155100 is required (sold separately)
Lift height: 2,5” Sport Control Arms are constructed from durable 42mm x 4mm wall DOM tube for maximum strength High-quality, maintenance-free factory-style bushings provide excellent vibration damping and ride quality Max tyre diameter: Sport/Sahara Fenders: 35” (w/ 3” front & 2.5” rear bump stops) Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops) Rubicon Fenders: 37” (w/ 2.5” front & 3” rear bump stops) In the box: Front 2,5” lift coil springs Front lower control arm kit (2) Front longer sway bar links Rear 2,5” lift coil springs (2) Rear longer sway bar links Rear track bar bracket (4) Front and rear Falcon progressive bump stops Front and rear bump stop strike pad kit Front and rear bump stop strike pad shim kit All necessary hardware Notes: Fit right-hand drive models ONLY Does NOT include shocks. We recommend TeraFlex or Fox Shock absorbers for superior performance
Lift height: 3,5" Delivers true Street & Trail (ST) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH) Front and Rear Progressive Bump Stops protect occupants and the vehicle from hard suspension bottoming Max tyre diameter: Sport | Sahara (w/ 3” front & 2,5” rear bump stops): 35” Rubicon (w/ 2” front & 2” rear bump stops: 35” Rubicon (w/ 2,5” front & 3” rear bump stops: 37” In the box: (2) Front coil spring Front control arm sport frame bracket kit Front track bar axle bracket Front progressive bump stop kit Front bump stop strike pad extension kit Front bump stop strike pad shim kit Front sway bar quick disconnect kit Front brake line anchor kit Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop strike pad extension kit Rear progressive bump stop kit Rear track bar axle bracket (2) Rear coil spring All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Requires longer shocks (sold separately) Alignment required Sport Frame Bracket HD Reinforcement Kit TX1938115 (sold separately) beefs up the Front Control Arm Sport Frame Brackets. Recommended, but not required
Lift Height: 3,5” Delivers true Street & Trail (ST) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH) Front lower control arm Sport Brackets correct caster angle and restores factory geometry for 2,5-4,5” lift Front track bar bracket corrects steering geometry to eliminate bump steer and other steering issues for 2,5-3,5” lift kits Falcon Progressive bump stops provide progressive compression during high-speed suspension movement Full range of movement for off-road flex & articulation Install & drive simple bolt-on installation – no welding required No alignment required Max Tyre Diameter: Sport/Sahara Fenders: 35” (w/ 3” front & 2,5” rear bump stops) Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops) Rubicon Fenders: 37” (w/ 2,5” front & 3” rear bump stops) In the box: Front Control Arm (2,5-4,5” Lift) Sport frame bracket kit Front track bar axle bracket Front brake line anchor kit Rear track bar axle bracket Rear 11,5” sway bar Link kit w/ Swivel Stud (2,5-4,5” Lift) Front & Rear progressive bump stop kit (0-4,5” Lift) Front & Rear 2” Bump stop strike pad extension kit Front & Rear 0.5” Bump stop strike pad shim kit Front sway bar quick disconnect kit (0–6” Lift) Front and rear coil springs Hardware Notes: Requires longer shocks (sold separately) Sport & Sahara models require aftermarket wheels w/ 4.5” backspacing or less Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tire Sport/Sahara models require the INCLUDED 0.5” front & 0.5” rear bump stop strike pad shims in order to fit 35” tires Rubicon models require the INCLUDED 0.5” front & 0.5” rear bump stop strike pad shims in order to fit 37” tires
Lift Height: 4,5” Delivers true Street & Trail (ST) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced NVH Front (3.5”+) and Rear (2.5”+) Track Bar Brackets correct caster angle, steering geometry, center the axles, and reduce body roll Falcon Progressive Front & Rear Bump Stops protect occupants and the vehicle from hard suspension bottoming Full range of movement for off-road flex and articulation Install and drive, simple bolt-on installation – no welding required No alignment require Max tyre diameter: Sport/Sahara Fenders: 35” (w/ 3” front & 2.5” rear bump stops) Sport/Sahara Fenders: 37” (w/ 3.5” front & 4” rear bump stops) Rubicon Fenders: 37” (w/ 2.5” front & 3” rear bump stops) 39": Aftermarket high fenders, rear bump extension and shims In the box: Front Control Arm Sport Brackets Front Track Bar Bracket Front Brake Line Anchor Kit Longer 11,5” Front Sway Bar Links Kit Rear Track Bar Bracket Longer 10,75” Rear Sway Bar Links Kit Front & Rear Falcon Progressive Bump Stop Kit Front & Rear 2" Bump Stop Strike Pad Extension Kit Front & Rear 0,5" Bump Stop Strike Pad Shim Kit 4,5” Lift Coil Springs All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres JL/JLU: Sport Bracket HD Reinforcement Kit (1938115) beefs up the Front Control Arm Sport Brackets. Recommended, but not required Requires longer shocks (not included in base kit) – Falcon shock absorbers recommended
Delivers true Street & Trail (ST) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH) Front control arm Sport Brackets, front track bar bracket, & rear track bar bracket optimize correct caster angle, restore geometry, eliminate bump steer, restore vehicle roll center, reduce body roll on 4.5” lift kits Falcon Progressive bump stops provide progressive compression during high-speed suspension movement Full range of movement for off-road flex & articulation Install & drive simple bolt-on installation – no welding required No alignment require Max tyre diameter: Sport | Sahara (w/ 3” front & 2,5” rear bump stops): 35” Sport | Sahara (w/ 3.5” front & 4” rear bumps stops): 37” Rubicon (w/ 2.5” front & 3” rear bump stops: 37” In the box: (2) Front Control Arm Sport Brackets Front Sway Bar Quick Disconnect Kit Front HD Forged Track Bar Bracket (2) Front Brake Line Anchors Rear HD Forged Adjustable Track Bar Bracket Rear Sway Bar Link Kit w/ Swivel Stud 11,5" Front & Rear 2" Bump Stop Strike Pad Kit Front & Rear 0,5" Bump Stop Strike Pad Shim Kit (4) Falcon Progressive Bump Stops 4,5” lift coil springs All necessary hardware Notes: Sport & Sahara models require aftermarket wheels w/ 4.5” backspacing or less Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Requires longer shocks, we recommend FOX 2.0 Performance (sold separately)
Increased ground clearance Easy installation Gives aggressive look Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front 3,5” lift coil springs Front sway bar link kit (TX744500) Front Track Bar Bracket (TX1953250) Rear 3,5” lift coil springs Rear Track Bar Bracket (TX1953600) Rear sway bar link kit Front & Rear 2” bump stop strike pad kit (TX1959500) Front & Rear 0,5” bump stop strike pad shim kit (TX1959300) TeraFlex 9550 VSS Twin-Tube Shocks All necessary hardware Notes: Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Caster correction required: Front Lower Sport Flexarm Kit (TX1253000) or Front Control Arm Sport Brackets (TX1938125) or adjustable 8-Arm Alpine [IR] Short Control Arm Kit (Alpine: TX1416610 | Alpine IR: TX1416510) and/or adjustable Alpine IR Front Track Bar (TX1753420) recommended Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately)
Increased ground clearance Easy installation Gives aggressive look Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front 3,5” lift coil springs Front sway bar link kit (TX744500) Front Track Bar Bracket (TX1953250) Rear 3,5” lift coil springs Rear Track Bar Bracket (TX1953600) Rear sway bar link kit Front & Rear 2” bump stop strike pad kit (TX1959500) Front & Rear 0,5” bump stop strike pad shim kit (TX1959300) (4) TeraFlex 9550 VSS Twin-Tube Shocks All necessary hardware Notes: Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires Caster correction required: Front Lower Sport Flexarm Kit (TX1253000) or Front Control Arm Sport Brackets (TX1938125) or adjustable 8-Arm Alpine [IR] Short Control Arm Kit (Alpine: TX1416610 | Alpine IR: TX1416510) and/or adjustable Alpine IR Front Track Bar (TX1753420) sold separately Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately)
Lift height: 2,5” Increases ground clearance Max tyre diameter: Rubicon (w/ 2” front & 2” rear bump stops): 35” Rubicon (w/ 2.5” front & 3” rear bump stops): 37” In the box: Front 3” spring spacers (2) Longer front sway bar links 11,5” Rear 2,5” spring spacers (2) Longer rear sway bar links 10,75” Front & rear 2” bump stop strike pad kit (TX1959500) Front & rear 2-2,5” shock extension brackets (TX1985200) All necessary hardware Notes: Fit Rubicon models ONLY Taller spacers in the front corrects the factory nose-down rake Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Rubicon models require JL/JLU Bump Stop Strike Pad Shim Kit TX1959300, in order to fit 37” tyres (sold separately) JL/JLU: Front Lower Sport Flexarms TX1253000 or Front Control Arm Sport Brackets TX1938125 recommended to optimize caster and pinion angles (sold separately) For Jeep JL 4XE may require replacement of the front drive shaft