Filtres
Lift Height 2,5" Levels the vehicle Max Tire Diameter:Sport/Sahara Fenders: 35” (w/ 3” front & 2.5” rear bump stops) Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops) Rubicon Fenders: 37” (w/ 2.5” front & 3” rear bump stops) In the box: Front coil springs (2) Front sway bar links Rear coil springs (2) Rear sway bar links Bump stop extensions Hardware All necessary hardware Notes: Caster correction recommended, but not required (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Requires longer shocks (sold separately) – we recommend Falcon Performance SP2 Mode Adjust Shocks or TeraFlex 9550 VSS Twin-Tube Shocks Requires alignment May require 2” Bump Stop Strike Pad Extension Kit (included) and/or 0.5” Bump Stop Strike Pad Shim Kit TX1959300 (sold separately)
Increases ground clearance Allows the installation of larger tyres Gives aggressive look Lift height: Front 2,5" Rear 0,5" Max tyre diameter: Sport/Overland: 35” Rubicon: 35” In the box: (2) Front sway bar link Front bump stop spacers (2) Front coil spring spacer 2" Front coil spring spacer 0,5" (2) Rear sway bar link Rear bump stop spacers Rear coil spring spacer 0,5" All necessary hardware Notes: Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Caster correction recommended, but not required: Front Lower Sport Control Arm Kit (TX1253000), or Front Control Arm Sport Frame Bracket Kit (TX1938125), or adjustable 8-Arm Short Control Arm Kit (Alpine: TX1417550 or Alpine IR: TX1417500), and/or HD Forged Adjustable Track Bar(s) (Front TX1753420 or Rear TX1764420) Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Requires longer shocks. We recommend Falcon shocks (sold separately) Requires alignment All OEM fenders require 2” Front and 1” Rear Bump Stop Extensions (INCLUDED) to fit 35” tires
Lift Height: 2,5” Easy installation Increased ground clearance Max Tire Diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front 2,5” lift coil springs (2) Front longer sway bar links 11,5” Rear 2,5” lift coil springs (2) Rear longer sway bar links 10,75” Front & Rear 2” bump stop strike pad kit (TX1959500) Front & Rear 0,5” bump stop strike pad shim kit (TX1959300) All necessary hardware Notes: Sport & Sahara models requires aftermarket wheels with 4,5” backspacing or less – or Offset Wheel Adapters for stock wheels May require HD Adjustable Rear Track Bar Bracket (TX1953600) to prevent contact between drive shaft & gas tank Requires Shock Extensions (TX1985200) or longer shocks, we recommend FOX Shock absorbers for superior performance Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tire Sport Front Lower Flexarms (TX1253000) recommended to optimize caster and pinion angles
Lift height 2,5" Longer spacers in the front corrects the factory nose-down rake Max tyre diameter: Sport | Sahara: 35” In the box: Front 3” spring spacers (4) Front 0,5” bump stop strike pad shims (2) Longer front sway bar links 11,5” Rear 2,5” spring spacers (2) Rear 0,5” bump stop strike pad shims (2) Longer rear sway bar links 10,75” Front & rear 2" bump stop strike pad kit (TX1959500) Front & rear 2-2,5” shock extension brackets All necessary hardware Notes: Does NOT fit Rubicon models Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres For Jeep JL 4XE may require replacement of the front drive shaft
Reliability Positive, responsive handling Dependable performance w/ zero worries Easy installation In the box: Front lift coil springs Rear track bar bracket Rear lift coil springs Rear sway bar links Bump stop extensions All necessary hardware Notes: Requires aftermarket wheels w/ 4,5” backspacing or less – or Offset Wheel Adapters TX1055000 for stock wheels (sold separately) 2012-2018 JKU models require exhaust spacers TX2610000 (sold separately) or other exhaust modification for proper driveshaft clearance if front extended shock length is greater than 24,5” Requires shock extensions: front upper TX1553800 and rear upper TX1554800 or longer shocks TX1545100 (sold separately)
Lift height: 2,5” Increases ground clearance Max tyre diameter: Sport | Sahara (w/ 3” front & 2.5” rear bump stops): 35” In the box: Front 3” lift spring spacers (4) Front 0,5” bump stop strike pad shims (2) Longer front sway bar links 11,5” Rear 2,5” lift spring spacers (2) Rear 0,5” bump stop strike pad shims (2) Longer rear sway bar links 10,75” Front & rear 2" bump stop strike pad kit (TX1959500) All necessary hardware Notes: Does NOT fit Rubicon models Taller spacers in the front corrects the factory nose-down rake Sport & Sahara models require aftermarket wheels w/ 4.5” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Sport/Sahara models require the INCLUDED 0,5” front & 0,5” rear bump stop strike pad shims in order to fit 35” tyres Requires Shock Extensions (TX1985200) or longer shocks (sold separately) JL/JLU: Front Lower Sport Flexarms (TX1253000) or Front Control Arm Sport Brackets (TX1938125) recommended to optimize caster and pinion angles (sold separately) For Jeep JL 4XE may require replacement of the front drive shaft
Lift Height: 2,5” Increased ground clearance Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front Sway Bar Link Kit 10,75" Front & Rear Bump Stop Strike Pad Extension Kit 2" Rear Sway Bar Link Kit w/ Swivel Stud 11,5" Lift Coil Spring Kits 2,5" 9550 VSS Twin-Tube Shock Kit (2.5-3” Lift) All necessary hardware Notes: Sport & Sahara models require aftermarket wheels with 4,5” backspacing or less – or Offset Wheel Adapters for stock wheels Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tire
Increased ground clearance Let mount larger tyres for backcountry exploration Easy installation In the box: (2) Front coil spring spacers Lift 2" (2) Rear leaf spring shackles Lift 1,5" All necessary hardware Notes: Max tyre diameter: 30x9.50 R15
Increased ground clearance Let mount larger tires for backcountry exploration Easy installation In the box: (2) Front IFS strut extension bracket (2) Rear coil spring spacer All necessary hardware Notes: Shock absorber changes not required w/ front sway bar connected
Allows installation of larger tyres Improves off-road handling characteristics Increases ground clearance Easy to install In the box: (2) Front springs 3,5" lift (2) Rear springs 3,5" lift (2) Bumpstop front (4) Bumpstop spacers front (2) Bumpstop rear (2) Bumpstop bracket rear (2) Bumpstop mounting strap rear (4) Bumpstop spacers rear (2) Swaybar link front (2) Swaybar link rear Panhard rod bracket front Panhard rod bracket rear Mounting kit Notes: Caster correction required – NOT INCLUDED. Recommended components: Front Lower Sport Control Arm Kit TX1253000 (sold separately), or Front Control Arm Sport Frame Bracket Kit TX1938125 (sold separately), or adjustable 8-Arm Short Control Arm Kit (Alpine TX1416610 (sold separately) or Alpine IR TX1416510 (sold separately), or adjustable 8-Arm Long Control Arm Bracket Kit Alpine TX1316010 (sold separately) or Alpine IR TX1310510 (sold separately), and/or adjustable Alpine IR Front Track Bar TX1753420 (sold separately). Requires wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 (sold separately) Models w/ plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” tyres Requires 2”-Stroke SpeedBump Progressive Bump Stop Kit TX1958352 (sold separately) Requires 2” Bump Stop Strike Pad Extension Kit TX1959500 (sold separately) and/or 0.5” Bump Stop Strike Pad Shim Kit TX1959300 (sold separately) Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets Alignment required Requires longer shocks
Increases ground clearance Allows the installation of larger tyres Gives aggressive look Max tyre diameter: Sport/Overland: 35” Rubicon: 37” In the box: (2) Front coil spring spacer 0,5" lift (2) Front coil spring spacer 3" lift (2) Rear coil spring spacer 1,5" lift (2) Front bumpstop bottom spacer 2" lift (2) Rear bumpstop top spacer 0,5" (2) Rear bumpstop top spacer 1,5" lift (4) Front bumpstop spacer 0,5" lift (4) Rear bumpstop bottom spacer 0,5" lift (2) Front sway bar link (2) Rear sway bar link (2) Spacer 1" All necessary hardware Notes: Caster correction required: Front Lower Sport Control Arm Kit (TX1253000), or Front Control Arm Sport Frame Bracket Kit (TX1938125), or adjustable 8-Arm Short Control Arm Kit (Alpine: TX1417550 or Alpine IR: TX1417500), and/or HD Forged Adjustable Front Track Bar(s) (TX1753420) Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (TX1057000) for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Requires 2” front upper, 1.5” rear upper, and 0.5” rear lower bump stop strike pad extensions to fit 35-37” tires All OEM fenders require 2” Front and 2” Rear Bump Stop Extensions (INCLUDED) to fit 35” tires Requires longer shocks. We recommend Falcon Performance Shocks (sold separately) Requires alignment
Increased ground clearance Easy installation Gives aggressive look Max Tire Diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” Includes: Front Coil Spring Kits Lift 3.5” Front Track Bar Axle Bracket (2.5-3.5” Lift) Front Bump Stop Strike Pad Extension Kit 2” Front Bump Stop Strike Pad Shim Kit 0.5” Front Sway Bar Link Kit 10.75” Rear Coil Spring Kits Lift 3.5” Rear Track Bar Axle Bracket (2.5-4.5” Lift) Rear Bump Stop Strike Pad Extension Kit 2” Rear Bump Stop Strike Pad Shim Kit 0.5” Rear Sway Bar Link Kit w/ Swivel Stud 11.5” All necessary hardware Notes: Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires. Caster correction required: Front Lower Sport Flexarm Kit (TX1253000) or Front Control Arm Sport Brackets (TX1938125) or adjustable 8-Arm Alpine [IR] Short Control Arm Kit (Alpine: TX1416610 | Alpine IR: TX1416510) and/or adjustable Alpine IR Front Track Bar (TX1753420) recommended Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately)
Lift height: 3,5” Easy installation Increased ground clearance Max Tire Diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front coil spring Lift 3,5” Front track bar axle bracket Front bump stop strike pad extension kit Front bump stop strike pad shim kit Front sway bar link kit Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop strike pad extension kit Rear track bar axle bracket Rear coil spring lift 3,5” Notes: Requires aftermarket wheels with 4,75” backspacing or less – or Offset Wheel Adapters for stock wheels Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyre May require 2” Bump Stop Strike Pad Extension Kit TX1959500 and/or 0,5” Bump Stop Strike Pad Shim Kit TX1959300 (sold separately) Requires longer Front Lower Sport Control Arms or Front Control Arm Sport Brackets or adjustable short or long Alpine (IR) Control Arms and Front and/or Rear HD Forged Adjustable Track Bar(s) to correct suspension geometry (sold separately) Requires longer shocks (sold separately)
Lift Height 3,5" Increase ground clearance Easy installation Max tyre diameter: Sport / Overland Fenders: 35” Rubicon Fenders: 37” In the box: Front track bar bracket (TX1953250) Front upper 2” bump stop strike pad kit Front lower 0,5" bump stop strike pad shim kit (2) Front sway bar link kit 11,5” Rear upper 1,5" bump stop strike pad kit Rear lower 0,5" bump stop strike pad shim kit (2) Rear sway bar link kit 13” 3,5” lift coil springs All necessary hardware Notes: Requires longer shocks Shocks NOT included (sold separately) Caster correction required Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels(sold separately) Models w/ plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately)
Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, and harshness Full range of movement for off-road flex and articulation Install and drive simple bolt-on installation – no welding required Max tyre diameter: 35" In the box: Front HD forged adjustable track bar Front brake line anchor kit Front sway bar disconnects Rear track bar bracket Rear sway bar links Front and rear coil springs (8) Fully adjustable Alpine flexarms SpeedBump bump stops Exhaust spacers All necessary hardware Notes: Requires longer shocks Not includes Shock absorbers, FOX absorbers recommended (sold separately) Requires aftermarket wheels w/ 4.5" backspacing or less – or Offset Wheel Adapters for stock wheels Driveshaft modifications may be necessary with this suspension system 2007-2011 JK/KU models will require Extended Length Front Brake Lines Cutting required Alignment required
Alpine's adjustable short control arms will balance wheel angles, toe-in and wheelbase for 0"-4.5" lifts Control arms made from 42mm x 4mm DOM tubing for maximum strength Mounts to factory control arm brackets Simple bolt-on installation - no welding required Front and rear progressive bump stops provide gradual compression during fast suspension movements. Reliable performance without worry Positive, responsive handling with reduced NVH High-quality, maintenance-free bushings provide excellent damping and ride quality Forged HD adjustable front tie rod improves steering response, centres the axle and reduces body roll Easily detachable front quick release control arms Full range of motion for flexibility and off-road performance In the box: Front 2,5” Lift coil spring kit Front HD Forged adjustable track bar (0-6” Lift) (2) Front lower 2” bump stop strike pad extensions Front sway bar quick disconnect kit (0-4,5” Lift) Front brake line anchor kit (2) Rear 0,5” Lift coil spring spacers (2) Rear lower 0,5” bump stop strike pad shim kit Rear 13” sway bar link kit (2,5-4,5” Lift) Front & Rear progressive bump stop kit (0-4,5” Lift) Alpine short control arm kit 8-Arm (0-4,5” Lift) All necessary hardware Notes: Shock absorbers (sold separately) required to be fitted 4.75" or smaller backspacing wheels or factory wheel spacers required (sold separately) Models with plastic bumpers require removal of cover to fit larger tyres Wheel alignment recommended after fitting Models with factory bumpers require bumper extensions (included) For diesel equipped vehicles, the lift height at the front will be 1" less, we recommend the use of TX1155100 spring washers (sold separately) Sport/Overland and Rubicon wings require 2" front and 1" rear Bump Stop/Strike Pad extensions/shims to fit 35" and 37" tyres respectively (included)
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion In the box: (2) Front coil spring Lift 2,5" (2) Front lower adjustable control arm Alpine (2) Front upper adjustable control arm Alpine Front forged adjustable track bar Front progressive bump stop kit Front bump stop extension kit Front bump stop strike pad shim kit Front sway bar quick disconnect kit Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop extension kit Rear progressive bump stop kit Rear track bar axle bracket (2) Rear lower adjustable control arm Alpine (2) Rear upper adjustable control arm Alpine (2) Rear coil spring Lift 2,5" All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2,5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required Requires longer shocks – Falcon Performance Shocks recommended (sold separately)
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion In the box: (2) Front coil spring Lift 2,5" Short control arm kit Alpine Front forged adjustable track bar Front track bar axle bracket Front progressive bump stop kit Front bump stop extension kit Front bump stop strike pad shim kit Front sway bar quick disconnect kit Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop extension kit Rear progressive bump stop kit Rear track bar axle bracket (2) Rear coil spring Lift 2,5" All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2,5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Simple bolt-on installation In the box: (2) Front coil spring Front track bar bracket (2) Front brake line anchors (2) Front longer sway bar links Front adjustable track bar Alpine (2) Front quick disconnect sway bar (2) Front lower adjustable control arm (2) Front upper adjustable control arm (2) Rear lower adjustable control arm (2) Rear upper adjustable control arm (2) Rear longer sway bar link Progressive bump stop kit TeraFlex Falcon (2) Rear coil spring Front and rear bump stop strike pad kit 2" Front and rear bump stop strike pad shim kit 0,5" All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required Requires longer shocks. We recommend Falcon shocks (sold separately)
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Max tyre diameter: Sport/Overland Fenders: 35" (w/ 3" front & 2,5" rear bump stops) Rubicon Fenders: 37" (w/ 2" front & 2.5" rear bump stops) In the box: (2) Front lower control arm Alpine (2) Front upper control arm Alpine (2) Front coil spring Front adjustable track bar Front sway bar quick disconnect kit Front bump stop spacers Front track bar relocation bracket Rear track bar axle bracket Rear forged sway bar kit Rear sway bar links Rear driveline spacer Rear upper control arms brackets Rear bump stop spacers Rear extended brake lines (2) Rear coil spring (2) Rear lower control arm Alpine (2) Rear upper control arm Alpine Coil spring retainer kit All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Alignment required Requires longer shocks, we recommended TeraFlex and Fox For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately)
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion In the box: (2) Front coil spring Lift 3,5" Short control arm kit Alpine Front forged adjustable track bar Front track bar axle bracket Front progressive bump stop kit Front bump stop extension kit Front bump stop strike pad shim kit Front sway bar quick disconnect kit Front brake line anchor kit Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop extension kit Rear progressive bump stop kit Rear track bar axle bracket (2) Rear coil spring Lift 3,5" All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required
Increases clearance Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration and harshness Full range of movement for off-road flex & articulation In the box: (8) Fully adjustable Alpine Flexarms CT Front HD forged adjustable track bar SpeedBump & progressive bump stop kit Front brake line anchor kit Front sway bar disconnects Rear track bar axle bracket Rear sway bar links Rear upper coil spring retainer kit Rear lower coil spring retainer kit Front and rear coil springs Exhaust spacers All necessary hardware Notes: Requires longer shocks, Not includes shock absorbers, FOX absorbers recommended (sold separately) Requires aftermarket wheels w/ 4.5” backspacing or less – or Offset Wheel Adapters for stock wheels TX1055000 (sold separately) Driveshaft modifications may be necessary with this suspension system TX1744014 (sold separately) 2007-2011 models will require extended length front brake lines (sold separately) Requires cutting Alignment required Max tyre diameter 35"
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Max tyre diameter: 33": Sport/Overland | (w/ 2" front & 1" rear bump stops) 35": Sport/Overland | (w/ 3" front & 2,5" rear bump stops) 35": Rubicon | (w/ 2" front & 1" rear bump stops) 37": Rubicon | (w/ 2" front & 2,5" rear bump stops) In the box: (2) Front upper adjustable long control arm Alpine (2) Front lower adjustable long control arm Alpine (2) Front coil spring Front bump stop spacers Front track bar relocation bracket Front quick disconnect sway bar kit Front adjustable track bar (2) Rear coil spring spacer Rear bump stop spacers (2) Rear upper adjustable long control arm Alpine (2) Rear lower adjustable long control arm Alpine Rear forged sway bar kit ST Rear driveline center support mount lowering spacer kit Rear track bar axle bracket kit Bracket kit for Alpine long arm Extended-travel shock accessory kit Coil spring retainer kit All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Alignment required Requires longer shocks, we recommended TeraFlex and Fox For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately) Requires cutting/removal of factory control arm bracketry to install Long Arm Brackets
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Max tyre diameter: Sport/Sahara Fenders: 35" (w/ 3" front & 2.5" rear bump stops) Sport/Sahara Fenders: 37" (w/ 3.5" front & 4" rear bump stops) Rubicon Fenders: 37" (w/ 2.5" front & 3" rear bump stops) In the box: (2) Front lower long control arm Alpine (2) Front upper long control arm Alpine Front forged adjustable track bar assembly w/ joint kit Front quick disconnect w/ swivel stud kit (2) Front coil spring Front track bar bracket (2) Front brake line anchor (2) Rear lower long control arm Alpine (2) Rear upper long control arm Alpine (2) Rear coil spring Rear track bar bracket Rear extended sway bar links Front & rear 2" bump stop strike pad kit Front & rear 0,5" bump stop strike pad shim kit Progressive bump stop kit Long arm bracket kit All necessary hardware Notes: The kit does NOT include shock absorbers, we recommend using TeraFlex or Fox