Filtres
Increases clearance Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration and harshness Full range of movement for off-road flex & articulation In the box: (8) Fully adjustable Alpine Flexarms CT Front HD forged adjustable track bar SpeedBump & progressive bump stop kit Front brake line anchor kit Front sway bar disconnects Rear track bar axle bracket Rear sway bar links Rear upper coil spring retainer kit Rear lower coil spring retainer kit Front and rear coil springs Exhaust spacers All necessary hardware Notes: Requires longer shocks, Not includes shock absorbers, FOX absorbers recommended (sold separately) Requires aftermarket wheels w/ 4.5” backspacing or less – or Offset Wheel Adapters for stock wheels TX1055000 (sold separately) Driveshaft modifications may be necessary with this suspension system TX1744014 (sold separately) 2007-2011 models will require extended length front brake lines (sold separately) Requires cutting Alignment required Max tyre diameter 35"
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Max tyre diameter: 33": Sport/Overland | (w/ 2" front & 1" rear bump stops) 35": Sport/Overland | (w/ 3" front & 2,5" rear bump stops) 35": Rubicon | (w/ 2" front & 1" rear bump stops) 37": Rubicon | (w/ 2" front & 2,5" rear bump stops) In the box: (2) Front upper adjustable long control arm Alpine (2) Front lower adjustable long control arm Alpine (2) Front coil spring Front bump stop spacers Front track bar relocation bracket Front quick disconnect sway bar kit Front adjustable track bar (2) Rear coil spring spacer Rear bump stop spacers (2) Rear upper adjustable long control arm Alpine (2) Rear lower adjustable long control arm Alpine Rear forged sway bar kit ST Rear driveline center support mount lowering spacer kit Rear track bar axle bracket kit Bracket kit for Alpine long arm Extended-travel shock accessory kit Coil spring retainer kit All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Alignment required Requires longer shocks, we recommended TeraFlex and Fox For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately) Requires cutting/removal of factory control arm bracketry to install Long Arm Brackets
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Max tyre diameter: Sport/Sahara Fenders: 35" (w/ 3" front & 2.5" rear bump stops) Sport/Sahara Fenders: 37" (w/ 3.5" front & 4" rear bump stops) Rubicon Fenders: 37" (w/ 2.5" front & 3" rear bump stops) In the box: (2) Front lower long control arm Alpine (2) Front upper long control arm Alpine Front forged adjustable track bar assembly w/ joint kit Front quick disconnect w/ swivel stud kit (2) Front coil spring Front track bar bracket (2) Front brake line anchor (2) Rear lower long control arm Alpine (2) Rear upper long control arm Alpine (2) Rear coil spring Rear track bar bracket Rear extended sway bar links Front & rear 2" bump stop strike pad kit Front & rear 0,5" bump stop strike pad shim kit Progressive bump stop kit Long arm bracket kit All necessary hardware Notes: The kit does NOT include shock absorbers, we recommend using TeraFlex or Fox
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Full range of movement for off-road flex and articulation In the box: Front adjustable track bar Alpine (2) Front coil spring Front track bar bracket (2) Front brake line anchors Bracket kit for Alpine long arm (2) Front quick disconnect sway bar kit (2) Front upper adjustable long control arms Alpine (2) Front lower adjustable long control arms Alpine (2) Rear upper adjustable long control arms Alpine (2) Rear lower adjustable long control arms Alpine (2) Rear coil spring Rear track bar bracket (2) Rear extended sway bar link Front & rear 2" bump stop strike pad kit Front & rear 0,5" bump stop strike pad shim kit Progressive bump stop kit Falcon Hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Sport/Sahara Fenders require 3” front and 2.5” rear bump stop extensions and shims (included) in order to fit 35” tyres Sport/Sahara Fenders require 3.5” front and 4” rear bump stop extensions and shims (included) in order to fit 37” tyres Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims (included) in order to fit 37” tyres Alignment required Requires longer shocks, Falcon Performance Shocks recommended (sold separately) Aftermarket High Fenders required to fit 39”+ tires. Bump Stop Extension and Shim requirements will vary based on setup. Installer must check for clearances May require an additional 0.5” Bump Stop Strike Pad Shim Kit TX1959300 (sold separately) Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets
Dependable performance w/ zero worries Increased suspension articulation along with superior ride quality and performance regardless of terrain High-quality, maintenance-free IR Bushings allow unrestricted rotation during droop for less overall bind during articulation as well as improved ride quality Install and drive simple bolt-on installation - no welding required Unprecedented smooth and quiet ride both on- and off-road thanks to the control arms and bushings Control arms include IR bushings In the box: Front coil springs Front adjustable IR track bar Front sway bar links Front brak line anchor kit Rear track bar Rear coil springs Rear track bar bracket Rear sway bar links Alpine IR Control Arm Kit (8-Arm Adjustable) SpeedBump & Progressive Bump Stop Kit Hardware Notes: Requires aftermarket wheels w/ 4.75" backspacing or less Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35" or larger tyres Sport/Sahara Fenders require 3" front and 2.5" rear bump stop extensions and shims (included) in order to fit 35" tyres Rubicon Fenders require 2" front and 2" rear bump stop extensions (included) in order to fit 35" tyres Rubicon Fenders require 2.5" front and 3" rear bump stop extensions and shims (included) in order to fit 37" tyres Alignment required Requires longer shocks, Falcon SP2 Mode Adjust Performance Shocks recommended (sold separately)
Adjustable Alpine IR Short Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4,5” lift kits Alpine IR Short Control Arms are constructed from durable 42mm x 4mm wall DOM tube for maximum strength Bolts to the factory control arm mounting brackets Install and drive simple bolt-on installation – no welding required Delivers true Rogue Trail (RT) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced NVH Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping Maintenance-free IR Bushings improve on- and off-road ride quality and performance Front and Rear HD forged adjustable track bars improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling Front SpeedBump and Rear Progressive Bump Stops provide progressive compression during high-speed suspension movement Features Front sway bar quick disconnects Full range of movement for off-road flex and articulation Install and drive simple bolt-on installation – no welding required In the box: Front Lift coil spring kit 2,5" Front HD Forged adjustable track bar (0-6” Lift) Front Sway Bar Quick Disconnect Kit (0-4,5” Lift) Front brake line anchor kit (2) Rear Lift coil spring spacers 0.5" Rear HD Forged adjustable track bar (0-6” Lift) Rear 13" sway bar link kit (2,5-4,5” Lift) Front & Rear SpeedBump & Progressive Bump Stop Kit (2,5-3,5” Lift) Alpine IR short control arm kit – 8-Arm (0-4,5” Lift) All necessary hardware Notes: Requires longer shocks (sold separately) Requires aftermarket wheels w/ 4.75” backspacing or less – or offset wheel adapters for stock wheels (not included) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tires All OEM fenders require 2” Front and 1” Rear bump stop extensions to fit 35” tires (included) Alignment required For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately)
Dependable performance w/ zero worries Positive, responsive handling w/ reduced NVH High-quality, maintenance-free factory-style bushings provide excellent vibration damping and ride quality Full range of movement for off-road flex and articulation Install and drive simple bolt-on installation – no welding required Control arms include IR bushings In the box: Front coil spring Lift 2,5" Alpine IR Short control arm kit Front sway bar quick disconnect kit Front HD forged adjustable track bar Rear HD forged adjustable track bar Rear track bar axle bracket Front SpeedBump & Progressive bump stop kit Rear SpeedBump & Progressive bump stop kit Front bump stop strike pad extension kit Rear bump stop strike pad extension kit Front bump stop strike pad shim kit Rear bump stop strike pad shim kit Rear coil spring Lift 2,5" Rear sway bar link kit w/ Swivel Stud All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Alignment required
Lift height: 3,5" Excellent performance on the trail as well as on the road Increases ground clearance Easy to install Control arms include IR bushings Max tyre diameter: Sport/Sahara Fenders: 35" (w/ 3" front & 2.5" rear bump stops) Rubicon Fenders: 35" (w/ 2" front & 2" rear bump stops) Rubicon Fenders: 37" (w/ 2.5" front & 3" rear bump stops) In the box: (2) Front coils spring Front adjustable track bar Alpine (2) Front quick disconnect sway bar kit (2) Front upper adjustable control arm Alpine IR (2) Front lower adjustable control arm Alpine IR (2) Rear upper adjustable control arm Alpine IR (2) Rear lower adjustable control arm Alpine IR Rear track bar HD adjustable (2) Rear extended sway bar link (2) Rear coil spring Rear track bar bracket Bump stop kit TeraFlex SpeedBump/Falcon All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Requires alignment Requires longer shocks. We recommend Falcon shocks (sold separately)
Lift height: 3,5" Excellent performance on the trail as well as on the road Increases ground clearance Control arms include IR bushings Max tyre diameter: Sport/Sahara Fenders: 35" (w/ 3" front & 2.5" rear bump stops) Rubicon Fenders: 35" (w/ 2" front & 2" rear bump stops) Rubicon Fenders: 37" (w/ 2.5" front & 3" rear bump stops) In the box: (2) Front coils spring Front adjustable track bar Alpine (2) Front quick disconnect sway bar kit (2) Front upper adjustable control arm Alpine IR (2) Front lower adjustable control arm Alpine IR (2) Rear upper adjustable control arm Alpine IR (2) Rear lower adjustable control arm Alpine IR Rear track bar HD adjustable (2) Rear extended sway bar link (2) Rear coil spring Rear track bar bracket Bump stop kit TeraFlex SpeedBump/Falcon All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres Requires alignment Requires longer shocks. We recommend Falcon shocks (sold separately)
Lift height: 3,5" Excellent performance on the trail as well as on the road Reliable Increases ground clearance Easy to install Control arms include IR bushings Max tyre diameter: Sport/Overland Fenders: 35” (w/ 3” front and 2,5” rear bump stops) Rubicon Fenders: 37” (w/ 2” front and 2,5” rear bump stops) In the box: Front coil springs (8) Alpine IR adjustable control arm kit Font forged adjustable track bar Assembly W/ Joint kit (2) Front quick disconnect w/ Swivel Stud kit boxed 0-4" Front hydraulic SpeedBump bump stops Rear coil springs Rear track bar Rear progressive bump stops Rear upper / lower spring retainer kit Rear Trail Rate dorged S/T sway bar kit Driveline spacer kit Extended travel accessory kit Rear track bar forged adjustable assembly W/ Joint kit Spring base kit RT Front and rear track bar brackets All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Alignment required Requires longer shocks, we recommended TeraFlex and Fox For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately)
Increases ground clearance Allows larger wheels to be fitted Improves handling, reduces noise and vibration Improves steering response Provides full range of motion Control arms include IR bushings Max tyre diameter: 33": Sport/Overland | (w/ 2" front & 1" rear bump stops) 35": Sport/Overland | (w/ 3" front & 2.5" rear bump stops) 37": Sport/Overland | (w/ 4" front & 3.5" rear bump stops) 35": Rubicon | (w/ 2" front & 1" rear bump stops) 37": Rubicon | (w/ 2" front & 2.5" rear bump stops) 39": Rubicon | (w/ 4" front & 3" rear bump stops) In the box: (2) Front coil spring Front track bar bracket Front control arm bracket Front bump stops Front quick disconnect sway bar kit Front forged adjustable track bar (2) Front lower long arm Alpine IR (2) Front upper long arm Alpine IR (2) Rear lower long arm Alpine IR (2) Rear upper long arm Alpine IR (2) Rear coil spring Rear adjustable track bar Rear driveline center support mount lowering spacer kit Rear forged sway bar kit ST Rear track bar bracket Front and rear bump stop strike pad shim kit Brake line anchor kit Progressive bump stops Coil spring retainer kit Extended-travel shock accessory kit Transmission skid plate and long arm crossmember reinforcement Bracket kit for Alpine long arm Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres Alignment required Requires longer shocks, we recommended TeraFlex and Fox For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately) Requires cutting/removal of factory control arm bracketry to install Long Arm Brackets
Increased ground clearance Easy installation Gives aggressive look Max tyre diameter: Sport/Overland Fenders: 37” Rubicon Fenders: 38” In the box: Front track bar Axle bracket (4,5-6” Lift) Front lower 2” bump stop strike pad Extensions Front lower 0,5” bump stop strike pad shims Front 11,5” sway bar Link kit w/ swivel stud (2,5-4,5” Lift) Front & rear 4,5” Lift Coil spring kits Rear upper 1,5” bump stop extension kit Rear upper 0,5” bump stop shim kit Rear lower 0,5” bump stop strike Pad shim kit Rear 13” sway bar Link kit w/ swivel stud (2,5-4,5” Lift) All necessary hardware Notes: Caster correction REQUIRED NOT INCLUDED Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tires Sport/Overland fenders and Rubicon fenders require 4” Front and 3” Rear Bump Stop/Strike Pad Extensions/Shims to fit 37 tires and 38” tires, respectively Requires additional components EcoDiesel models require 1” front coil spring spacers TX1155100 (sold separately) Alignment required Requires longer shocks (sold separately)
Lift Height:4,5” Dependable performance w/ zero worries Positive, responsive handling Full range of movement for off-road Install and drive All factory stability controls remain functional In the box: Front Track Bar Axle Bracket (TX1953500) Front Sway Bar Link Kit Rear Track Bar Axle Bracket (TX1953600) Rear Sway Bar Link Kit w/ Swivel Stud Front & rear 4.5” Lift Coil Spring Kits Front & rear 2” Bump Stop Strike Pad Extension Kit Front & rear 0,5” Bump Stop Strike Pad Shim Kit All necessary hardware Max Tyre Diameter: Sport/Sahara : 35” (w/ 3” front & 2.5” rear bump stops) Sport/Sahara : 37” (w/ 3.5” front & 4” rear bump stops) Rubicon : 37” (w/ 2.5” front & 3” rear bump stops) Notes: Caster correction required Sport & Sahara models require aftermarket wheels w/ 4.5” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Sport/Sahara models require the INCLUDED 0.5” front & 0.5” rear bump stop strike pad shims in order to fit 35” tyres Sport/Sahara models require an additional 0.5” Front & Rear Bump Stop Strike Pad Shim Kit TX1959300 (sold separately) in order to fit 37” tyres Rubicon models require the INCLUDED 0.5” front & 0.5” rear bump stop strike pad shims in order to fit 37” tyres JL/JLU: Front Control Arm Sport Brackets (# 1938125) recommended to correct caster angles and restore factory geometry Requires longer shocks (sold separately)
Lift Height: 2,5” Increase ground clearance Levels the front with the rear of the vehicle Positive, responsive handling Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: (2) Front sway bar links 11,5” (2) Rear sway bar links 10,75” Front and rear 2" bump stop strike pad kit Front and rear 0,5" bump stop strike pad shim kit 2,5” lift coil springs (4) 9550 VSS shocks Hardware Notes: Sport & Sahara models require aftermarket wheels with 4,5” backspacing or less – or Offset Wheel Adapters for stock wheels Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tire
Lift height: 2,5” Install & drive simple bolt-on installation – no welding required Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH) Preset front lower Sport flexarms optimize correct caster & pinion angles for 2.5-3.5” lift kits Falcon Progressive bump stops provide progressive compression during high-speed suspension movement Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35" Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front coil spring Lift 2,5" Front lower sport control arm kit Front progressive bump stop Front bump stop strike pad extension kit Front bump stop strike pad shim kit Front sway bar quick disconnect kit RHD Rear sway bar link kit w/ Swivel Stud Rear bump stop strike pad shim kit Rear bump stop strike pad extension kit Rear progressive bump stop Rear track bar axle bracket RHD Rear coil spring Lift 2,5" All necessary hardware Notes: Fits right-hand drive models ONLY Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyre Alignment required Does NOT include shocks, we recommend FOX Shock absorbers for superior performance (sold separately) NOT recommended for vehicles with heavy load. If you have any doubts, please contact our sales department NOT recommended for Diesel models For Diesel models spacer load level kit TX1155100 is required (sold separately)
Lift height: 2,5” Increases ground clearance Max tyre diameter: Rubicon (w/ 2” front & 2” rear bump stops): 35” Rubicon (w/ 2.5” front & 3” rear bump stops): 37” In the box: Front 3” lift spring spacers (2) Longer front sway bar links 11,5” Rear 2,5” lift spring spacers (2) Longer rear sway bar links 10,75" Front & rear 2" bump stop strike pad kit (TX1959500) All necessary hardware Notes: Fits Rubicon models ONLY Taller spacers in the front corrects the factory nose-down rake Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Rubicon models require JL/JLU Bump Stop Strike Pad Shim Kit TX1959300 in order to fit 37” tyres (sold separately) Requires Shock Extensions TX1985200 or longer shocks (sold separately) JL/JLU: Front Lower Sport Flexarms TX1253000 or Front Control Arm Sport Brackets TX1938125 recommended to optimize caster and pinion angles (sold separately) For Jeep JL 4XE may require replacement of the front drive shaft
Lift height: 1,5" Max tyre diameter: 33" Allows fitment of larger tyres for more ground clearance and more aggressive aesthetics Front Progressive Front Bump Stops and front and rear strike pads provide progressive compression during high-speed suspension movement Minimal impact on suspension geometry Delivers true street & trail (ST) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced NVH Full range of movement for off-road flex and articulation,Install and drive, simple bolt-on installation – no welding required In the box: (2) Front coil spring (2) Rear coil spring Falcon progressive bump stop kit Bump stop spacers All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Alignment required Requires longer shocks (sold separately)
Lift height: 1,5" Max tyre diameter: 33" Allows fitment of larger tyres for more ground clearance and more aggressive aesthetics Front Progressive Front Bump Stops and front and rear strike pads provide progressive compression during high-speed suspension movement Minimal impact on suspension geometry Delivers true street & trail (ST) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced NVH Full range of movement for off-road flex and articulation,Install and drive, simple bolt-on installation – no welding required In the box: (2) Front coil spring (2) Rear coil spring Falcon progressive bump stop kit Bump stop spacers All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Alignment required Requires longer shocks (sold separately)
Lift height: 1,5" Allows fitment of larger tyres for more ground clearance and more aggressive aesthetics Corrects the factory nose-down rake Minimal impact on suspension geometry Delivers true street & trail (ST) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced NVH Falcon progressive front & rear bump stops protect occupants and the vehicle from hard suspension bottoming Full range of movement for off-road flex and articulation Install and drive, simple bolt-on installation – no welding required Max tyre diameter: Sport/Sahara Fenders: 33” Rubicon Fenders: 33” Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops) In the box: 1,5” Lift coil spring spacers Front and rear Falcon progressive bump stops Hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Rubicon Fenders require 2” front & 2” rear bump stop extensions in order to fit 35” tyres Requires 2” Front & Rear Bump Stop Strike Pad Extension Kit TX1959500 (sold separately) Works with original or stock-length aftermarket shock absorbers (sold separately) Alignment required
Lift height: 1,5" Allows fitment of larger tyres for more ground clearance and more aggressive aesthetics Corrects the factory nose-down rake Minimal impact on suspension geometry Delivers true street & trail (ST) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced NVH Falcon progressive front & rear bump stops protect occupants and the vehicle from hard suspension bottoming Full range of movement for off-road flex and articulation Install and drive, simple bolt-on installation – no welding required Max tyre diameter: Sport/Sahara Fenders: 33” Rubicon Fenders: 33” Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops) In the box: 1,5" Lift coil spring spacers Front & rear Falcon progressive bump stop kit (TX1959200) All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres Rubicon Fenders require 2” front & 2” rear bump stop extensions in order to fit 35” tyres Requires 2” Front & Rear Bump Stop Strike Pad Extension Kit TX1959500 (sold separately) Works with original or stock-length aftermarket shock absorbers (sold separately) Alignment required
Lift height: 2,5" Delivers true Street & Trail (ST) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH) SpeedBump progressive bump stops provide progressive compression during high-speed suspension movement Full range of movement for off-road flex & articulation Max tyre diameter: 35" In the box: (2) Front coil spring 2,5" Front lower control arm Front forged adjustable track bar Front progressive bump stop kit Front sway bar quick disconnect kit Front brake anchor kit (2) Rear coil spring 2,5" Rear brake line relocation kit Rear lower coil spring retainer kit Rear upper coil spring retainer kit Rear sway bar link kit Rear progressive bump stop kit Rear track bar axle bracket kit Exhaust spacer kit All necessary hardware Notes: Requires aftermarket wheels w/ 4,5” backspacing or less Requires cutting Alignment required Requires longer shocks (not included in base kit) – Falcon and Fox shock absorbers recommended (sold separately)
Lift height: 2,5” Install & drive simple bolt-on installation – no welding required Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH) Preset front lower Sport flexarms optimize correct caster & pinion angles for 2,5” lift kits Falcon Progressive bump stops provide progressive compression during high-speed suspension movement Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35” Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front 2,5” lift coil springs Front lower Sport Flexarm Kit (2) Front longer sway bar links 11,5” Rear 2,5” lift coil springs (2) Rear longer sway bar links 10,75” Rear Track Bar Bracket (TX1953600) (4) Front & Rear Falcon Progressive Bump Stops (TX1959200) Front & Rear 2” bump stop strike pad kit (TX1959500) Front & Rear 0,5” bump stop strike pad shim kit (TX1959300) All necessary hardware Notes: Requires aftermarket wheels with 4,75” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyre Does NOT include shocks. We recommend FOX Shock absorbers for superior performance
Lift height: 2,5" Delivers true Street & Trail (ST) performance Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH) SpeedBump progressive bump stops provide progressive compression during high-speed suspension movement Full range of movement for off-road flex & articulation Max tyre diameter: 35" In the box: (2) Front coil spring 2,5" Front lower control arm Front forged adjustable track bar Front progressive bump stop kit Front sway bar quick disconnect kit Front brake anchor kit Rear brake line relocation kit Rear lower coil spring retainer kit Rear upper coil spring retainer kit Rear sway bar link kit Rear progressive bump stop kit Rear track bar axle bracket kit (2) Rear coil spring 2,5" Exhaust spacer kit All necessary hardware Notes: Requires aftermarket wheels w/ 4,5” backspacing or less Requires cutting Alignment required Requires longer shocks (not included in base kit) – Falcon shock absorbers recommended (sold separately)
Lift height: 2,5” Install & drive simple bolt-on installation – no welding required Dependable performance w/ zero worries Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH) Preset front lower Sport flexarms optimize correct caster & pinion angles for 2.5-3.5” lift kits Falcon Progressive bump stops provide progressive compression during high-speed suspension movement Max tyre diameter: Sport | Sahara (with 3” front & 2.5” rear bump stops): 35” Rubicon (with 2” front & 2” rear bump stops): 35" Rubicon (with 2.5” front & 3” rear bump stops): 37” In the box: Front lower Sport Flexarm kit Front sway bar quick disconnect kit Rear track bar axle bracket Rear 11,5" Sway Bar Link Kit w/ Swivel Stud Front & rear bump stop strike pad kit (TX1959500) Front & rear 0,5" bump stop strike pad shim kit (TX1959300) (4) Falcon Progressive Bump Stops (TX1959200) 2,5” lift coil springs All necessary hardware Notes: Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 (sold separately) Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyre Does NOT include shocks, we recommend FOX Shock absorbers for superior performance (sold separately) NOT recommended for vehicles with heavy load. If you have any doubts, please contact our sales department NOT recommended for Diesel models For Diesel models spacer load level kit TX1155100 is required (sold separately)