Filtres
Nuts to prevent theft of rims Fit alloy wheels Black color 14x2mm In the box: (25) Lug nuts Lug nuts key Notes: If you don't know if the nuts will mach please contact our sales department Do NOT use with pneumatic wrench
Made from steel Featuring a hexagonal pattern skid plate Includes 20" LED light bar One piece solid design Black texture powder coat finish Easy installation, no drilling require High-quality product Light hole dimensions: width 55,2cm, height 9,4cm In the box: Bull bar RC2 LED light bar 20" Mounting brackets Hardware
Lift 2" Adjustable design allowing 1/8” to 2” carrier bearing drop Improves rear driveline angle for lifted trucks with 2-piece rear driveshaft Easy to install bolt-on design All hardware included Notes: Does NOT fit Raptor models
(4) Fender flares Complement oversized tyres and high-clearance lift kits Style matte black finish Can be painted Adds up to 6 cm of tyre (front) Adds up to 5 cm of tyre (rear) Made in the USA from very thick Dura-Flex 2000 TPO, its the thickest, most flexible material available UV resistant Complete kit Dimensions: Extend front fender flare: 6,04cm Extend rear fender flare: 5,08cm Front flare height: 20,32 cm Front flare tyre coverage: 6,04 cm Rear flare height: 22,86 cm Rear flare tyre coverage: 5,08 cm Notes: Fit models with bed lenght: 5' 6" 6' 6" 8' 1" Drilling required Does NOT fit Raptor model
46mm monotube design ensures consistent, fade-free performance in all conditions Extremely practical alternative to coil spring spacers, with the benefit of Bilstein monotube technology Multiple OEM specified snap-ring grooves allow for different spring seat positions Increases suspension travel Utilizes vehicle‘s stock front coil springs and OEM mounting hardware Dimensions: Extended: 21,83" Collapsed: 16,93" Travel: 4,9" Mounts: Top mount: stem Bottom mount: eyelet
Body: 2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time Body Plating: Clear-anodized for a durable finish Reservoir: Internal IFP mono-tube reservoir design Components: Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Piston: Race-developed high-flow piston design Valving: Application specific valving to maximize performance Seals: Redundant sealing pack system main seal, wiper seal, scraper seal Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures Bearing: Large diameter, heavy-duty spherical Adjustments: Ride height preload ring Dimensions: Extended: 21.99" Compressed: 16.60" Travel: 5.39" Mounts: Top mount: oem Bottom mount: eyelet Notes: Fits Ford F-150 09-12 4WD ONLY
Body: 2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time Body Plating: Clear-anodized for a durable finish Reservoir: Internal IFP mono-tube reservoir design Components: Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Piston: Race-developed high-flow piston design Valving: Application specific valving to maximize performance Seals: Redundant sealing pack system main seal, wiper seal, scraper seal Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures Bearing: Large diameter, heavy-duty spherical Adjustments: Ride height preload ring Dimensions: Extended: 20.79" Compressed: 15.90" Travel: 4.89" Mounts: Top mount: oem Bottom mount: eyelet Notes: Fits Ford F-150 09-12 RWD ONLY
Easy bolt-on installation Includes pre-loaded coil for no-fuss installation Maintains smooth, factory-like ride Increased ground clearance Application specific velocity sensitive valving Structurally engineered for lifted applications Nitrogen gas charged to improve ride, handling, and reduce shock oil aeration Offers improved tire contact with the road for increased stability and performance Infinitely variable damping Leak-proof piston seal Special formulated low friction shock oil Massive 1 3/8" bore Hardened chromed piston rod provides superior corrosion resistance and enhances sealing properties Silver powder coat finish Dimensions: Extended: 27.4" Compressed: 22.36" Notes: Fit 4WD models ONLY Cannot be installed in conjunction with a strut spacer Rough Country N3 lifted struts are designed to replace strut spacers from pre-existing lifted vehicles ONLY
Easy bolt-on installation Includes pre-loaded coil for no-fuss installation Maintains smooth, factory-like ride Increased ground clearance Application specific velocity sensitive valving Structurally engineered for lifted applications Nitrogen gas charged to improve ride, handling, and reduce shock oil aeration Offers improved tire contact with the road for increased stability and performance Infinitely Variable Damping Leak-proof piston seal Special formulated low friction shock oil Massive 1 3/8in Bore Hardened chromed piston rod provides superior corrosion resistance and enhances sealing properties Silver powder coat finish Dimensions: Extended: 23,85" Compressed: 19,37" In the box: (2) Premium N3 Lifted Strut Notes: Cannot be installed in conjunction with a strut spacer Fits models with 3-inches of lift ONLY Rough Country N3 lifted struts are designed to replace strut spacers from pre-existing lifted vehicles ONLY
Allows full access to bed Easy on or off in less than six minutes Completely assembled in the box - no loose parts No tools required Drive with the cover in the open or closed position Tailgate lock can provide additional security Sleek appearance improves fuel economy Lightweight 6061 aluminum frame All weather seal keeps out rain and snow Tri-Fold Design Notes: Fits models with bed length 5'7" / 170 cm ONLY Fits F150 SVT Raptor models 10-14
Proudly made in the USA Easy bolt-on installation Hidden install behind the front bumper Only roller fairlead and tow hook are visible Durable black carbon powder coating Will accommodate most winches on the market In the box: Winch plate Roller fairlead mounting bracket Solenoid relocation bracket Hardware Notes: Does NOT fit Ecoboost models Does NOT fit models with a body lift kit installed
BRAID WINRACE BRA-WIN75176F15035G • Finition : Gun Metal
BRAID WINRACE S BRA-WINS8176F15034G • Finition : Gun Metal
XD XD822 MONSTER II XD82279067718 • Finition : Matte Black • Charge utile : 1134kg
XD XD822 MONSTER II XD82289067718 • Finition : Matte Black • Charge utile : 1134kg
Kit Demi-lames Additionnelles IRONMAN 4X4 Load Plus LP4 +450kg • 70x12x442mm • Système breveté qui permet de rouler jusu'à la charge maximum autorisée en toute sécurité • S'installe et se dépose en 20 minutes seulement à l'aide de 2 clés plates • Idéal pour les configurations charges lourdes occasionnelles ou permanentes
Kit Demi-lames Additionnelles IRONMAN 4X4 Load Plus LP7 +450kg • 75x12x438mm • Système breveté qui permet de rouler jusu'à la charge maximum autorisée en toute sécurité • S'installe et se dépose en 20 minutes seulement à l'aide de 2 clés plates • Idéal pour les configurations charges lourdes occasionnelles ou permanentes
Easy bolt-on installation Maintains factory ride quality Increased ground clearance Levels the front with the rear of the vehicle No need to disassemble your struts to install Built from heavy-duty proprietary composite material that will never rust or succumb to the elements In the box: Front strut extensions Rear 1" lift blocks Rear u-bolts (2) Rear N3 Premium shocks Hardware Notes: Does NOT fit Raptor models
Easy bolt-on installation Maintains factory ride quality Increased ground clearance Levels the front with the rear of the vehicle No need to disassemble your struts to install In the box: Front strut spacers Rear 1" lift blocks Rear u-bolts (2) Rear N3 Premium shocks Hardware
Proudly made in the USA Easy installation Increased ground clearance Maintains factory ride quality Levels the front with the rear of the vehicle Front strut specs: Easy bolt-on installation Includes pre-loaded coil for no-fuss installation Maintains smooth, factory-like ride Increased ground clearance Application specific velocity sensitive valving Structurally engineered for lifted applications Nitrogen gas charged to improve ride, handling, and reduce shock oil aeration Offers improved tire contact with the road for increased stability and performance Infinitely Variable Damping Leak-proof piston seal Special formulated low friction shock oil Massive 1 3/8in Bore Hardened chromed piston rod provides superior corrosion resistance and enhances sealing properties Silver powder coat finish In the box: (2) Upper control arm (2) Front strut (2) Rear lift block U-bolts (2) Rear shock N3 Premium Hardware Notes: Fits 4WD models ONLY Does NOT fit regular/standard cab models This kit does not work on models with stock ride height over 22" (measured from center of wheel to the bottom of the fender) Trucks with FX4, Snow Prep, and other off-road packages that modify front strut assemblies will likely measure over 22in and will not work with this kit
Easy bolt-on installation Includes loaded struts for no-fuss installation No cutting or drilling required Includes new tubular upper control arms Control arms keep ball joints at optimum angles for less wear and tear Control arms include Clevite rubber bushings for enhanced durability Increased ground clearance Levels the front and rear of the truck Can be returned to stock In the box: (2) Upper control arms (2) Strut spacers (2) Lift Blocks (4) U-bolts Hardware (2) Rear Premium N3 series Notes: Does not fit regular/standard cab models This kit does not work on models with stock ride height over 22" (measured from center of wheel to the bottom of the fender) Trucks with FX4, Snow Prep, and other off-road packages that modify front strut assemblies will likely measure over 22" and will not work with this kit 2009-2010 trucks measuring over 22" should consider the 4" lift kit RCK59930 2011-2013 trucks measuring over 22" should consider the 4" lift kit RCK57430 Fits 4WD models ONLY
Proudly made in the USA Track width remains the same as factory Increased ground clearance Levels the front with the rear of the vehicle Gives an aggressive look of the vehicle In the box: Front lifted knuckles Front upper strut spacers Front crossmember Front sway-bar drop brackets Front differential drop brackets Front brake line brackets Front driveshaft spacer, Rear crossmember Rear lifted blocks Rear u-bolt Rear brake line brackets (2) Rear Premium N3 shocks Hardware Notes: Requires minor cutting and drilling 9" wide wheels are recommended Fits 4WD models ONLY
Aligns the front with the rear of the vehicle Increases ground clearance Preserves factory driving comfort Strut extensions made of high quality aluminium Strut extensions thickness 32 mm Matt black color Easy to install In the box: (2) Strut extension Hardware Notes: Does NOT fit Raptor models Actual spacer thickness is not a 1 to 1 ratio with the gained lift due to the suspension geometry
Proudly made in the USA Easy bolt-on installation Increased ground clearance Levels the front with the rear of the vehicle Maintains factory ride quality No need to disassemble your struts to install In the box: (2) Strut extensions Hardware Notes: Does NOT fit PowerBoost Hybrid models For models from 2021 and Lightning models, does not fit cars equipped with the CCD system (Continuously Controlled Damping) Does NOT fit 09-16 Raptor models Does NOT fit Tremor models For Ford F150 Raptor fits 4WD models ONLY
Fits 1,21 m (4') wide roof rack Made from 16-gauge fully welded 1" round steel tubing Textured black powder coat Provides protection for four 9" diameter lights Light cage bolts directly to Smittybilt Defender roof rack Notes: Lights and wiring sold separately Jeep Grand Cherokee WJ / WG 99-01 fits with factory roof rack ONLY Jeep Grand Cherokee ZJ 93-98 fits with factory roof rack ONLY Jeep Cherokee XJ 90-01 fits with factory roof rack ONLY
OFD OFFROAD FABRICATION
Easy to install Durable, steel construction Integrated steps for easy access to bed Retains factory receiver hitch Includes backup sensor relocators Flush LED light specs: 2880 lumens 36 watts Flood beam Each light contains 6, 3 watt high intensity Cree LEDs IP67 Waterproof rating Moisture Breather technology reduces moisture build-up behind the lens Includes premium, flat-wound wiring harness with on/off switch Durable die cast aluminum housing In the box: Rear bumper (2) Rough Country Black-Series LED flush mount lights Wiring harness Backup sensor relocators Notes: LEDs are for off-road use ONLY
Proudly made in the USA Durable powder coated steel brackets Push to connect air fittings Internal bump stop in air bag Double convoluted air bag Complete kit Levels truck when towing for safer load carrying In the box: (2) Air bags Mounting brackets U-bolts U-Bolt plates 90° fittings Inflation valves Block shims Notes: Minor drilling required Does NOT increase towing capacity Does NOT include air compressor (RC10100 sold separately) Does NOT fit F150 Raptor models Newer body style, excludes heritage models
Advanced foam-cell technology Vehicle specific multi-stage valving Increased fluid capacity for max heat dissipation 180° directional mounting Construction ensures solid contact between tire and road Twin tube construction Chrome plated shaft Sintered iron piston Black boot included Dimensions: Extended: 26,07" Compressed: 15,57" Travel: 10,5" Mounts: Top mount: eyelet Bottom mount: eyelet
Advanced foam-cell technology Vehicle specific multi-stage valving Increased fluid capacity for max heat dissipation 180° directional mounting Construction ensures solid contact between tire and road Twin tube construction Chrome plated shaft Sintered iron piston Black boot included Dimensions: Extended: 29,83" Compressed: 17,32" Travel: 12,51" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: Ford F150 04-20 fits with 4WD models ONLY
46mm monotube design ensures consistent, fade-free performance in all conditions Patented degressive valving instantly reacts to changing surface conditions OEM certified mounting hardware allows for easy installation Zinc plated for resistance against harsh elements Durable vulcanized neoprene rubber bushings Dimensions: Extended: 28,90" Collapsed: 17,68" Travel: 11,22" Mounts: Top mount: eyelet Bottom mount: eyelet
DSC - Dual Speed Compression Body: 2.5” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time Reservoir: 2,5" Smooth bore and honed seamless alloy reservoir Body Plating: Zinc-plated and double-clear coated for long lasting finish Components: Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 7/8" hard chrome plated heat-treated alloy steel Piston: Race-developed high-flow piston design Seals: Redundant sealing pack system main seal, wiper seal, and scraper seal Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures Adjuster: DSC allows 10 separate low-speed and 12 high-speed compression levels Dimensions: Extended: 28.36" Compressed: 17.40" Travel: 10.96" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: For Ford 04-08 fits 4WD models ONLY
Body: 2.5” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time Reservoir: 2,5" Smooth bore and honed seamless alloy reservoir Body Plating: Zinc-plated and double-clear coated for long lasting finish Components: Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 7/8" hard chrome plated heat-treated alloy steel Piston: Race-developed high-flow piston design Seals: Redundant sealing pack system main seal, wiper seal, and scraper seal Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures Dimensions: Extended: 28.36" Compressed: 17.40" Travel 10.96" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: For Ford 04-08 fits 4WD models ONLY
2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time Clear-anodized for a durable finish Internal IFP mono-tube reservoir design Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Race-developed high-flow piston design Application specific valving to maximize performance Redundant sealing pack system main seal, wiper seal, scraper seal JM92 Advanced Suspension Fluid for improved performance at variable temperatures Quiet nitrile rubber allows for increased suspension articulation Dimensions: Extended: 28.52" Compressed: 17.90" Travel: 10.62" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: For Ford 04-08 fits 4WD models ONLY
2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time Clear-anodized for a durable finish Internal IFP mono-tube reservoir design Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Race-developed high-flow piston design Application specific valving to maximize performance Redundant sealing pack system main seal, wiper seal, scraper seal JM92 Advanced Suspension Fluid for improved performance at variable temperatures Quiet nitrile rubber allows for increased suspension articulation Dimensions: Extended: 32.82" Compressed: 20.20" Travel: 12.60" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: For Ford 04-08 fits 4WD models ONLY
High-pressure nitrogen-gas filled monotube design Extra-large 46mm bore 180? directional mounting is perfect for custom set ups Low operation temperature Internal bump stops No fade or lag makes for consistent performance Perfect for lifted vehicles High quality product Dimensions: Extended: 29,83" Compressed: 17,32" Travel: 12,51" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: Ford F150 04-20 fits with 4WD models ONLY
Multi- stage velocity sensitive valving Twin tube construction Bonded iron piston Chromed piston rod with micro pores Red polyurethane bushings Dimensions: Extended: 26,07" Compressed: 15,57" Travel: 10,50" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: Shock must be mounted body down
Multi- stage velocity sensitive valving Twin tube construction Bonded iron piston Chromed piston rod with micro pores Red polyurethane bushings Dimensions: Extended: 29,83" Compressed: 17,32" Travel: 12,51" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: Shock must be mounted body down Ford F150 04-20 fits with 4WD models ONLY
10-Stage variable valving High pressure nitrogen charged 35mm piston Chromed hardened 18mm piston rod 54mm Shock body to dissipate heat faster 36kN Tensile strength Spring loaded piston rod seal Military spec. fluid rated To –40° C Rubber bushings for better absorption Metallic silver paint Dimensions: Extended: 30,04" Compressed: 17,6" Travel: 12,44" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: For Ford F150 Raptor fits 4WD models ONLY
10-Stage variable valving High pressure nitrogen charged 35mm piston Chromed hardened 18mm piston rod 54mm Shock body to dissipate heat faster 36kN Tensile strength Spring loaded piston rod seal Military spec. fluid rated To –40° C Rubber bushings for better absorption Metallic silver paint Dimensions: Extended: 33,07" Compressed: 19,29" Travel: 13,78" Mounts: Top mount: eyelet Bottom mount: eyelet
High-pressure nitrogen-gas filled monotube design Extra-large 46mm bore 180? directional mounting is perfect for custom set ups Low operation temperature Internal bump stops No fade or lag makes for consistent performance Perfect for lifted vehicles High quality product Dimensions: Extended: 26,07" Compressed: 15,57" Travel: 10,5" Mounts: Top mount: eyelet Bottom mount: eyelet
Made from galvanized steel Solid one piece design Provide easy access to your car especially to the cars with lifted suspension Protective bedliner black coating: corrosion, impact and abrasion resistance Easy installation, no drilling required 7,5" wide stepping area High-quality product In the box: (2) Side steps Hardware Notes: Additional drop steps GR69420000T available (sold separately) Fit SuperCrew Cab models ONLY
Proudly made in the USA Resets your speedometer to accurate readings for larger tyres Easy Plug and Play connection Updates OE ECM Shift Points to accommodate larger tyres Recalibrates electronic stability control to work with larger tyres Reads diagnostic codes like "check engine light" Option to return to stock settings In the box: Speedometer recalibrator USB update cable Notes: One set can be used with one car ONLY, then it's blocked for any other
Système DECKED compatible avec les bennes ou planchers de 5’6’’/ 1676mm et plus • Longueur du système DECKED 1618mm • Poids du système DECKED 94kg • Les accessoires suivants sont inclus dans la commande de votre système DECKED 1 caisse à outils Sixer de couleur beige,1 caisse à outils Halfrack de couleur beige, 1 bac de rangement Drawerganizer, 4 anneaux d'arrimage, 4 Stash bins compartiments de rangement profonds et 2 de tailles intermédiaires, 2 séparateurs de tiroirs
Système DECKED compatible avec les bennes ou planchers de 6’6’’/ 1981mm et plus • Longueur du système DECKED 1892mm • Poids du système DECKED 105kg • Les accessoires suivants sont inclus dans la commande de votre système DECKED 1 caisse à outils Sixer de couleur beige,1 caisse à outils Halfrack de couleur beige, 1 bac de rangement Drawerganizer, 4 anneaux d'arrimage, 4 Stash bins compartiments de rangement profonds et 2 de tailles intermédiaires, 2 séparateurs de tiroirs
Proudly made in the USA Easy install Features a durable black powder coat Compatible with both single-row and dual-row curved LED light bars Designed to work with light bars measuring 53-5/8" from mounting point to mounting point Compatible with Rough Country 54" curved dual-row LED light bar Notes: Requires minor drilling Light bar RC72954BD sold separately Designed to work with curved LED light bars ONLY