Filtres
Proudly made in the USA Easy bolt-on installation Solid construction Recommended for cars with suspension lift Prevents possible vibrations In the box: (6) Carrier bearing shims Hardware
46mm monotube design ensures consistent, fade-free performance in all conditions Extremely practical alternative to coil spring spacers, with the benefit of Bilstein monotube technology Multiple OEM specified snap-ring grooves allow for different spring seat positions Increases suspension travel Utilizes vehicle‘s stock front coil springs and OEM mounting hardware Dimensions: Extended: 18,66" Collapsed: 13,86" Travel: 4,8" Mounts: Top mount: stem Bottom mount: eyelet Notes: Includes spring perch
(4) Fender flares Complement oversized tyres and high-clearance lift kits Adds up to 7,5 cm of tyre coverage from debris Style matte black finish Can be painted Made in the USA from very thick Dura-Flex 2000 TPO, its the thickest, most flexible material available UV resistant Complete kit Dimensions: Front flare height: 12,7 cm Front flare tyre coverage: 7,62 cm Rear flare height: 13,33 cm Rear flare tyre coverage: 7,62 cm Notes: Fit models with bed lenght:6' 2" Does NOT fit flare side models- compatible with 4x4 models ONLY Drilling is reguired
DSC - Dual Speed Compression Body: 2.5" smooth bore zinc plated seamless steel body Body Plating: Zinc-plated and double-clear coated for long lasting finish Reservoir: 2.5" Smooth bore and honed seamless alloy reservoir Components: Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 7/8" hard chrome plated heat-treated alloy steel Piston: Race-developed high-flow piston design Valving: Application specific valving to maximize performance Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures Bearing: PTFE-lined, heat-treated, alloy steel spherical Adjuster: DSC allows 10 separate low-speed and 12 high-speed compression levels Dimensions: Extended: 18.96" Compressed: 13.66" Travel: 5.30" Mounts: Top mount: oem Bottom mount: eyelet Note: For Tacoma 95-04 4WD requires longer, upper control arm (sold separately) For Tacoma 98-04 RWD fits 6 lug version ONLY
Body: 2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time Body Plating: Clear-anodized for a durable finish Reservoir: Internal IFP mono-tube reservoir design Components: Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Piston: Race-developed high-flow piston design Valving: Application specific valving to maximize performance Seals: Redundant sealing pack system main seal, wiper seal, scraper seal Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures Bearing: Large diameter, heavy-duty spherical Adjustments: Ride height preload ring Dimensions: Extended: 18.49" Compressed: 13.60" Travel: 4.89" Mounts: Top mount: oem Bottom mount: eyelet Notes: For RWD models fits 6 lug version ONLY
ALU-CAB AC-C2-D-TT16-SB • Hard top Aluminium ALU-CAB Contour Noir Toyota Tacoma Gen 3 5' Short Bed • Version avec hayon latéraux pleins sans vitres coulissantes
ALU-CAB AC-C2-D-TT16-SB-W • Hard top Aluminium ALU-CAB Contour Noir Vitré Toyota Tacoma Gen 3 5' Short Bed • Version avec vitres coulissantes sur les hayons latéraux du hard-top
ALU-CAB AC-C2-D-TT16-LB • Hard top Aluminium ALU-CAB Contour Noir Toyota Tacoma Gen 3 6', Long Bed • Version avec hayon latéraux pleins sans vitres coulissantes
ALU-CAB AC-C2-D-TT16-LB-W • Hard top Aluminium ALU-CAB Contour Noir Vitré Toyota Tacoma Gen 3 6' Long Bed • Version avec vitres coulissantes sur les hayons latéraux du hard-top
BLACK RHINO BR1790WAR126140G12 • Jante aluminium renforcée 4x4 BLACK RHINO WARLORD 9x17 6x139.7 CB112 ET+12 GUN METAL
Ce kit de barres de toit contient une paire de barres de toit Front Runner d’une largeur de 1425mm, 2 paires de pieds Front Runner et tous les composants nécessaires pour installer les barres de toit sur les barres longitudinales d’origine d’une Tacoma 2005+.
La galerie Slimline II pour toute la longueur du toit de 1358mm/53.5'' contient le plateau Slimline II, un déflecteur de vent et 2 foot rails pour monter le plateau Slimline II sur votre Tacoma Double Cabine 2005+. Le plateau s’installe facilement en utilisant les points de montage existants. Le forage n’est pas nécessaire. Compatible avec l’antenne ‘aileron requin’.
Kit Demi-lames Additionnelles IRONMAN 4X4 Load Plus LP2 +450kg • 60x12x420mm • Système breveté qui permet de rouler jusu'à la charge maximum autorisée en toute sécurité • S'installe et se dépose en 20 minutes seulement à l'aide de 2 clés plates • Idéal pour les configurations charges lourdes occasionnelles ou permanentes
Proudly made in the USA Increased ground clearance No strut disassembly or strut compressor required for installation Features application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use Fabricated blocks are stronger and offer a longer lifespan than cast blocks In the box: Front knuckle extensions Front strut spacers Front crossmember Front skid plate Front steering extensions Front bump stops Front sway-bar drop brackets Front power steering pressure line Rear 3" fabricated block Rear crossmember Rear brake line (2) Rear Premium N3 Shocks Hardware Notes: Requires cutting and drilling Will NOT work on 5 lug vehicles Will NOT on vehicles with a body lift
Advanced foam-cell technology Vehicle specific multi-stage valving Increased fluid capacity for max heat dissipation 180° directional mounting Construction ensures solid contact between tire and road Twin tube construction Chrome plated shaft Sintered iron piston Black boot included Dimensions: Extended: 22,58" Compressed: 13,71" Travel: 8,87" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: Toyota Tacoma 95-04 fits with 4WD models ONLY Toyota Tacoma Pre-Runner 95-04 fits with 2WD models ONLY Toyota 4Runner 84-85 fits with 4WD models ONLY
Advanced foam-cell technology Vehicle specific multi-stage valving Increased fluid capacity for max heat dissipation 180° directional mounting Construction ensures solid contact between tire and road Twin tube construction Chrome plated shaft Sintered iron piston Black boot included Dimensions: Extended: 24,75" Compressed: 14,54" Travel: 10,21" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: Toyota Tacoma 95-04 fits with models ONLY Toyota Tacoma Pre-Runner 95-04 fits with 2WD models ONLY
46mm monotube design ensures consistent, fade-free performance in all conditions Patented degressive valving instantly reacts to changing surface conditions OEM certified mounting hardware allows for easy installation Zinc plated for resistance against harsh elements Durable vulcanized neoprene rubber bushings Dimensions: Extended: 21,26" Collapsed: 13,62" Travel: 7,64" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: Fits TRD models
2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time Clear-anodized for a durable finish Internal IFP mono-tube reservoir design Black-anodized, CNC-machined 6061-T6 billet aluminum Shaft: 5/8" hard chrome plated heat-treated alloy steel Race-developed high-flow piston design Application specific valving to maximize performance Redundant sealing pack system main seal, wiper seal, scraper seal JM92 Advanced Suspension Fluid for improved performance at variable temperatures Dimensions: Extended: 20.52" Compressed: 13.40" Travel: 7.12" Mounts: Top mount: eyelet Bottom mount: eyelet
Multi- stage velocity sensitive valving Twin tube construction Bonded iron piston Chromed piston rod with micro pores Red polyurethane bushings Dimensions: Extended: 22,58" Compressed: 13,71" Travel: 8,87" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: Shock must be mounted body down Toyota Tacoma 95-04 fits with 4WD models ONLY Toyota Tacoma Pre-Runner 95-04 fits with 2WD models ONLY Toyota 4Runner 84-85 fits with 4WD models ONLY
Multi- stage velocity sensitive valving Twin tube construction Bonded iron piston Chromed piston rod with micro pores Red polyurethane bushings Dimensions: Extended: 24,75" Compressed: 14,54" Travel: 10,21" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: Shock must be mounted body down Toyota Tacoma 95-04 fits with 4WD models ONLY Toyota Tacoma Pre-Runner 95-04 fits with 2WD models ONLY
46mm monotube design ensures consistent, fade-free performance in all conditions Patented degressive valving instantly reacts to changing surface conditions OEM certified mounting hardware allows for easy installation Zinc plated for resistance against harsh elements Durable vulcanized neoprene rubber bushings Dimensions: Extended: 22,09" Collapsed: 14,07" Travel: 8,02" Mounts: Top mount: eyelet Bottom mount: eyelet Notes: Fits TRD models
Proudly made in the USA Easy bolt-on installation Increased ground clearance Maintains factory ride quality Levels the front with the rear of the vehicle Front strut spacers do not require strut disassembly or strut compressor for installation Front strut spacers do not preload your coil spring Precision laser cut rear shackles maintain factory ride quality Does not stiffen like add-a-leafs Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use In the box: Front strut extensions Rear 1,5" lift shackles (2) Rear N3 Series shocks Hardware Notes: Does NOT fit models with 5 lug wheels Does NOT work with Bilstein coils Minor exhaust modification will be required. See install instructions for details 32x11.50 tires will fit with wheels with a greater offset than factory and/or wheel spacers