Filtres
Amortisseur arrière OME BP51 • BP5160068
Amortisseur arrière OME MT64 • MT64601031
Amortisseur arrière OME Nitro+ 63381
Amortisseur avant OME BP51 • BP5190026L
Amortisseur avant OME BP51 • BP5190026R
Amortisseur avant OME MT64 • MT64901021
Low friction polyoxymethylene ball race Larger ball diameter for increased range of motion Maintenance free design Fully greasable ball joints 100% press-in installation Sold individually Notes: Fits Rough Country control arms ONLY (sold separately) RC19401A RC10025 RC10025RED RC71400 RC10026 RC10026RED
Aluminum support bars and rails with steel vertical uprights Each upright has integrated threaded fasteners for accessory or light mounting and a standard MOLLE system Equipped with Go Rhino's exclusive 4-Core cross bar system that accepts any 1/4" x 20 hardware Included multi-functional gear plate can be mounted outside, inside, on top and underside of rack and can hold several accessories including fuel tanks, water tanks, recovery boards, etc. Mounting bracket options provide additional tie down locations Textured Black Finish Vertical 4-Core side bars provide unlimited accessory mounting options for popular off-road and overlanding accessories XRS Overlanding Rack System for managing trail gear and accessories No drilling required In the box: Bed rack Multi-functional gear plate Mounting kit Notes: Does not fit models equipped with RAM BOX
SHOCK MOUNT FRONT STRUT
Proudly made in the USA Flat black Low Gloss Black Korad™ UV Protected Tyre coverage: 2" / 5,08 cm Protects vehicle from on & off-road debris Installation hardware included No drill installation with tough corrosion-resistant hardware UV-protected Korad™ low gloss cap to keep them looking new for years In the box: (2) Front fender flare (2) Rear fender flare Hardware
Proudly made in the USA Flat black Flare height: 6" / 15,24 cm Quick and easy install with no drilling UV protected to prevent fading Built from a special Tri-Blend ABS material for maximum strength and durability Easily paintable to color match your truck Can be removed to bring truck back to stock In the box: (2) Front fender flare (2) Rear fender flare Hardware
Proudly made in the USA Flat black Tyre coverage: 2" / 5,08 cm Flare height: 6" / 15,24 cm Simulated riveted look Quick and easy install with no drilling Added protection from rocks, mud and other road debris UV protected to prevent fading Built from a special Tri-Blend ABS material for maximum strength and durability Easily paintable to color match your truck Can be removed to bring truck back to stock In the box: (2) Front fender flare (2) Rear fender flare Hardware
200 pound Max capacity with Dual Safety Cables Can be mounted on both sides Aluminum table surface Attachment points for additional accessories Durable safety clip Safety catch when closed with an option for a padlock No drilling required Dimensions: Length: 51 3/8" / 130,5 cm Width: 19,5" / 49,5 cm Notes: For use with the Go Rhino Xtreme Overland Rack Full-Sized Truck ONLY
Alu-Cab Canopy "Contour" Toyota Tundra 5.5" 2022+
Alu-Cab Canopy "Contour" Toyota Tundra 5.5" 2022+ with window
Alu-Cab Canopy "Contour" Toyota Tundra 6.5" 2022+
Alu-Cab Canopy "Contour" Toyota Tundra 6.5" 2022+ with window
Kit de montage OME • VM80010071
Kit de montage OME • VM80010072
Kit Demi-lames Additionnelles IRONMAN 4X4 Load Plus LP3 +450kg • 60x12x442mm • Système breveté qui permet de rouler jusu'à la charge maximum autorisée en toute sécurité • S'installe et se dépose en 20 minutes seulement à l'aide de 2 clés plates • Idéal pour les configurations charges lourdes occasionnelles ou permanentes
Kit OME FK131
Kit OME FK132
Easy bolt-on installation No cutting or drilling required Includes new fabricated upper control arms Control arms keep ball joints at optimum angles for less wear and tear Control arms include Clevite rubber bushings for enhanced durability Includes rear track bar bracket to keep the axle centered under the rear of the truck Increased ground clearance Levels the front and rear of the truck In the box: (2) Front upper control arms (2) Front strut spacers Front skid plate (2) Front differential spacers (4) Front bump stop spacers (2) Rear coil spring spacers Rear track bar relocation bracket Rear shock relocation brackets Hardware Notes: Does NOT fit Pro Series models Does NOT fit models equipped with Adaptive Variable Suspension (AVS) system Does NOT fit models equipped with Load-Leveling Rear Height Control Air Suspension Fits 4WD models ONLY
Proudly made in the USA Easy bolt-on installation Increased ground clearance Maintains factory ride quality Raises the front of the vehicle by 1,75" No strut disassembly or strut compressor required for installation No differential spacing or modification required In the box: (2) Front upper strut extensions Hardware Notes: Does NOT fit Pro Series and XSP-X models Does NOT fit models equipped with Adaptive Variable Suspension (AVS) system
M14x1,5mm Color black Allows for proper wheels assembly Dimensions: Key length: 90 mm Nut height: 50 mm In the box: (24) Lug nut Lug nuts key Notes: If you don't know if the nuts will mach please contact our sales department Do NOT use with pneumatic wrench
Paire de ressorts linéaires • Tarage 220Lbs/in • Fil 17mm • Hauteur libre 480/490mm
Paire de ressorts linéaires • Tarage 742Lbs/in • Fil 19mm • Hauteur libre 385/385mm
Paire de ressorts linéaires • Tarage 742Lbs/in • Fil 19,5mm • Hauteur libre 430/430mm
Paire de triangles avant supérieurs OME UCA0016
Nuts to prevent theft of rims Short lug nuts Fit alloy wheels Black color 14x1,5mm In the box: (25) Lug nuts Lug nuts key Notes: If you don't know if the nuts will mach please contact our sales department Do NOT use with pneumatic wrench
M14x1,5mm Color black Allows for proper wheels assembly Dimensions: Key length: 90 mm Nut height: 35 mm In the box: (24) Lug nuts Lug nuts key Notes: If you don't know if the nuts will mach please contact our sales department Do NOT use with pneumatic wrench
Convenient, roll-up design Easily removeable for 100% bed access High-quality, durable leather grain fabric Designed to withstand the elements Tight front and rear seals keep your bed clean and dry Single trigger latch for easy removal Easy installation Sleek and stylish Notes: Fits models with bed length 5'7" ONLY Fits models with or without factory cargo management Does NOT fit models equipped with factory storage boxes
Système DECKED compatible avec les bennes ou planchers de 5’7’’/ 1701mm et plus • Longueur du système DECKED 1618mm • Poids du système DECKED 94kg • Les accessoires suivants sont inclus dans la commande de votre système DECKED 1 caisse à outils Sixer de couleur beige,1 caisse à outils Halfrack de couleur beige, 1 bac de rangement Drawerganizer, 4 anneaux d'arrimage, 4 Stash bins compartiments de rangement profonds et 2 de tailles intermédiaires, 2 séparateurs de tiroirs
Système DECKED compatible avec les bennes ou planchers de 6’7’’/ 2006mm et plus • Longueur du système DECKED 1892mm • Poids du système DECKED 105kg • Les accessoires suivants sont inclus dans la commande de votre système DECKED 1 caisse à outils Sixer de couleur beige,1 caisse à outils Halfrack de couleur beige, 1 bac de rangement Drawerganizer, 4 anneaux d'arrimage, 4 Stash bins compartiments de rangement profonds et 2 de tailles intermédiaires, 2 séparateurs de tiroirs
Compressor dimensions: Length: 7" x Width: 2.75 x Height: 5" Moisture and dust resistant for durability in rugged conditions Includes DOT approved air lines for reliability Duty cycle: 9% @ 100 PSI, Recommended max working pressure: 120 PSI Complete kit includes a gauge and all necessary wiring and airline to integrate with your existing airbag kit Features a low-pressure sensor to maintain proper bag inflation Rough Country's 12volt 1.03 CFM Compressor provides efficient performance